[EJ_3]

Originally Posted by David@ApexRaceParts

Which wheel model are you referring to? While we do not have any of the EC-7's in Profile 3 all around, we do have the ARC-8's in Profile 3 in both the 17" and 18" all around on an e90.

Here is an example of the 18" Profile 3:

Think I just found my square setup for the track . Take it that the 18x9.5 et 35 would be the best square setup (18 w/ profile 3) for an e92 with 255/35 R Compound tires?

[Expert@ApexWheels]

Originally Posted by Manny_World

Think I just found my square setup for the track . Take it that the 18x9.5 et 35 would be the best square setup (18 w/ profile 3) for an e92 with 255/35 R Compound tires?

The 18x9" ET31 EC-7's squared would be the most ideal fitment for the e9x pre-LCI actually. However, for the ARC-8's, the 18x9.5" ET35 is the option available for a squared fitment, though there are some requirements for it to work on your e92. This setup would require a 5mm spacer in front to clear the front struts and at least -2.5 degrees of camber for proper fender clearance. The rears would need a fender roll for R-compounds to avoid any fender rubbing. Here is a blog article that goes into a little more detail about the 17x9.5" ET35 squared fitment, which still reflects what the 18x9.5" ET35 would require as well.

[skyguy]

Originally Posted by chatch10

What suspension is the 335i running? That drop looks perfect to me.

AST 4100s on swift springs

[XM_Rocks]

Originally Posted by skyguy

pre-lci e90: 275/35r18 front on 9.5 et35 w/ 3mm spacer, 285/35r18 rear on 10.5 et27

Should I do it?

Rolled?

Special camber settings?

Any rub?

Looks amazing.

[thestein1016]

17x9 et30 and 17x9.5 et35. 20mm spacer in rear. 255 and 275 nitto nt01s. Would like to step up the rears to a 10.5 though since I have the room.

[Expert@ApexWheels]

Thank you for sharing thestein1016, your e92 is stunning!

[austinla335d]

Originally Posted by David@ApexRaceParts

We do have 19" versions of the PS-7's and EC-7's currently. The 19" ARC-8's are on their way, due for arrival in September of this year.

I wish the aggressiveness you guys put on the E46 M3 was attempted on the E90... Now i have to wait for someone to risk it and share the news and pics and miss out on the $200 discount. grrrrrrrrrr
Most ARC 8 buyers are non-M peeps!!

[jwebb335xi]

Originally Posted by Manny_World

Think I just found my square setup for the track . Take it that the 18x9.5 et 35 would be the best square setup (18 w/ profile 3) for an e92 with 255/35 R Compound tires?

I have 18x9 ET 31 EC7 on a 2008 335xi with 255/35/18 PSS and they just clear all stock suspension components up front without any modification. Understeer is dramatically reduced.

[LotusBMW]

Anyone got some good shots of an E9_ 335 with the ARC-8 with 18 x 9.5 et35 on both front and rear? Ideally something that is running all the right spacers and the camber and right height is sorted too. Also good quality shots from a few different angles.

Thanks guys!

EDIT there is conflicting information about the silver 4 door above on this page. Be good to know if it is definitely a 18 x 9.5 square set up.

[austinla335d]

Originally Posted by LotusBMW

Anyone got some good shots of an E9_ 335 with the ARC-8 with 18 x 9.5 et35 on both front and rear? Ideally something that is running all the right spacers and the camber and right height is sorted too. Also good quality shots from a few different angles.

Thanks guys!

EDIT there is conflicting information about the silver 4 door above on this page. Be good to know if it is definitely a 18 x 9.5 square set up.

Here's his stats:
Apex ARC-8 rims, anthracite:
Front: 18", 9.5", et35, Falken ZIEX ZE-912 235/40/18
Rear: 18", 10", et25, Falken ZIEX ZE-912 265/35/18
Koni Yellow shocks
H&R Sport springs

Source:
http://www.e90post.com/forums/showpo...77&postcount=1

[Amini77]

Would this set up work for a 330xi?

Arc-8
17x9 ET 30 235/40/17
17x9.5 ET 35 255/40/17

I'd like to go with 17x10 in the rear, however I don't see it under E9X Non-M on the website and I'm not sure what is the correct offset for my desired setup. Currently I'm running in the rear 19x9.5 ET35 with 255/35/19 + 12mm spacers on Michelin PSS with some rub only when passengers are in the back.

[iturbo_bmw]

Originally Posted by jwebb335xi

I have 18x9 ET 31 EC7 on a 2008 335xi with 255/35/18 PSS and they just clear all stock suspension components up front without any modification. Understeer is dramatically reduced.

if u don't mind me asking how much camber do u run in the front? im rubbing on mid-turn bumbs ..

[iturbo_bmw]

i could never find pics of AW with black ARC-8s so here

black rims are really hard to pick up in pics..but they look sick in person

rims and car are really dirty btw

[///RiceBox]

anyone with 19" EC-7's?

[ihc95]

Originally Posted by iturbo_bmw

i could never find pics of AW with black ARC-8s so here

black rims are really hard to pick up in pics..but they look sick in person

rims and car are really dirty btw

What are your offsets?

[iturbo_bmw]

Originally Posted by ihc95

What are your offsets?

18x9 et 30 (et42 +12mm spacer) Front & 18x9.5 et35 Rear

camber is -2.4 F & -2.2R

Front could use more camber or 10mm spacer instead of 12mm cause it rubs sometimes

In the rear it looks like i can fit a 10 or 12mm spacer with my camber but i may need to cut part of the fender like rob suggests in one of his threads. I plan on reducing camber in the back cause i think its a little too much for a dd. then i will measure and try to throw on whatever spacer i can

[ihc95]

Originally Posted by iturbo_bmw

18x9 et 30 (et42 +12mm spacer) Front & 18x9.5 et35 Rear

camber is -2.4 F & -2.2R

Front could use more camber or 10mm spacer instead of 12mm cause it rubs sometimes

In the rear it looks like i can fit a 10 or 12mm spacer with my camber but i may need to cut part of the fender like rob suggests in one of his threads. I plan on reducing camber in the back cause i think its a little too much for a dd. then i will measure and try to throw on whatever spacer i can

Thanks for the response. I'm was going to try to run a 255/35 18 PSS on a 18x9 et31 EC7 up front but it looks like I won't have enough clearance, especially since I don't plan on getting camber plates. Oh well, hopefully a 235/40 18 clears up front but I'll have to live with the slightly stretched look.

[Jsoboti]

Anyone have pics of an LCI E92 on 19'' PS-7 with aggressive fitment? If so please post specs and if your fenders are rolled or not

[Bobby_Sardells]

Originally Posted by ///RiceBox

anyone with 19" EC-7's?

waiting on my 19" PS-7s as we speak. Damn Canadian customs

[mave198]

Here's mine. Shitty phone pic.

Arc-8s

Front et 35 18x9.5 235/40 PSS
Rear et 25 18x10 265/35 PSS

No spacers, no rubbing, BMW performance shocks dropped on Eibach Pros.

Still got space in the rear, might go up to 285s........

[XM_Rocks]

Originally Posted by thestein1016

17x9 et30 and 17x9.5 et35. 20mm spacer in rear. 255 and 275 nitto nt01s. Would like to step up the rears to a 10.5 though since I have the room.

Those 17's are amazing!

[Expert@ApexWheels]

Great looking cars iturbo_bmw, ihc95, & mave198, thanks for sharing!