[ricx]

I'm trying to get tranny fluid temps. I get to:

Read status

F1 Timeoutwerte
F2 Getriebesensoren
F3 Getriebe extern
F4 Aktive Ersatz-/Sicherungsfunktionen
F5 CAN
Pressing or Clicking F2 I get: "park"

Any ideas? How do I get to the ECU description file?

This is what I have:
[ROOT_GETRIEBE]
DESCRIPTION=Transmission
ENTRY= GS19,Gearbox / Automatic GS19,
ENTRY= GS1912,Automatic Transmission,
ENTRY= VGSG90,X-Drive Transmission VGSG,
ENTRY= DKG_90,DCT (Dual Clutch Transmission),

I get this error
EDIABAS-Error

ApiResultText: Error #98
SYS-0008: JOB NOT FOUND
API job error or no such result!
Continue script processing?

This is what I found, how do I get into ECU description file?
EDIABAS manual:
98 SYS-0008: JOB NOT FOUND EDIABAS_SYS_0008
Meaning: The job couldn't be found in the ECU description file.
Causes: The job is missing in the description file, or the description file is wrong.
Error correction: Check if the desired job exists in the description file. The program BESTINFO (contained in the RUNTIME SYSTEM) can be used to list all job names: bestinfo <Name of the description file with path and extension>
Also check exactly if the job is spelled correct. If the desired job does not exist in the description file, extend the description file by the job.
Target system: WIN SCO QNX