GB - MTEC HID Kit (Error Free!)

EVO_S4 · 07-31-2006, 06:37 PM

I going to pass on it, I got some family emergency to take care off, so no more mods for me for awhile

Bimmer325 · 07-31-2006, 08:52 PM

hey post some pics on your CF door pillars...both farther away & close-up pics as well..thanks

too bad u dont want the MTEC.

EVO_S4 · 07-31-2006, 09:23 PM

Quote:

Originally Posted by Bimmer325

hey post some pics on your CF door pillars...both farther away & close-up pics as well..thanks

too bad u dont want the MTEC.

I got alot of stuff going on right now so I wont have time with the car, but if do a search since there are some other people that has and on one of my earlier threads (GruppeM intake) have some pics of it

ADHD · 08-01-2006, 12:17 PM

MY wifey surprised me with these things!!!!! They just showed up at my door just now! :rocks: :rocks: :rocks:
Hellz ya...ill be installing them tomorrow morning...ill let u all now how it goes!

poldim · 08-01-2006, 03:39 PM

I'm bailing to.

I'm going to France next week so I'll need the spare cash.

Bimmer325 · 08-02-2006, 08:40 AM

its OK guys, need not give an excuse...no binding at all! As i said earlier, if you can find better/equivalent price in the States, why not! Need not source from afar on the other part of the globe...GL with the install.

So, i'm calling it off this GB is closed for good.

poldim · 08-02-2006, 10:09 AM

I havent found a better deal, and even if I did, I'm sure the difference would be ~5 bucks. Something not worth going through someone else that doesnt have nearly 500 posts on this forum. If you can do this in 3 to 4 weeks when I come back I'm in.

ADHD · 08-02-2006, 12:12 PM

Quote:

Originally Posted by Bimmer325

its OK guys, need not give an excuse...no binding at all! As i said earlier, if you can find better/equivalent price in the States, why not! Need not source from afar on the other part of the globe...GL with the install.

So, i'm calling it off this GB is closed for good.

got one installed!! Noticed u had the same problem as mine! The connector was set at the outer settings and needs to be on the inner! The connector that comes with it will not allow that..SO what I did was popped out the wires out of the connector and broke the clip out and put the wires in the holes and carefully put the wires into the connector at the inside settings and popped it on! used a little rubber cement to fill the holes and Im golden! Ill post a little DIy on it!
I noticed u just put the bare connectors into the plug with electrical tape so maybe once u see mine ull want to change yours!

poldim · 08-02-2006, 08:05 PM

Quote:

Originally Posted by ADHD

got one installed!! Noticed u had the same problem as mine! The connector was set at the outer settings and needs to be on the inner! The connector that comes with it will not allow that..SO what I did was popped out the wires out of the connector and broke the clip out and put the wires in the holes and carefully put the wires into the connector at the inside settings and popped it on! used a little rubber cement to fill the holes and Im golden! Ill post a little DIy on it!
I noticed u just put the bare connectors into the plug with electrical tape so maybe once u see mine ull want to change yours!

pics?

ADHD · 08-02-2006, 08:25 PM

http://www.e90post.com/forums/showth...888#post384888

Mofo · 08-02-2006, 08:50 PM

Quote:

Originally Posted by ADHD

got one installed!! Noticed u had the same problem as mine! The connector was set at the outer settings and needs to be on the inner! The connector that comes with it will not allow that..SO what I did was popped out the wires out of the connector and broke the clip out and put the wires in the holes and carefully put the wires into the connector at the inside settings and popped it on! used a little rubber cement to fill the holes and Im golden! Ill post a little DIy on it!
I noticed u just put the bare connectors into the plug with electrical tape so maybe once u see mine ull want to change yours!

So there's some mods that need to be done? It's not a perfect fitment/plug and play then like I've been reading?

Caster · 08-02-2006, 09:46 PM

Sounds like it, if anyone is interested Invision Auto is offering the kit for $295 shipped, just drop them an email =]

ADHD · 08-02-2006, 10:24 PM

Quote:

Originally Posted by Mofo

So there's some mods that need to be done? It's not a perfect fitment/plug and play then like I've been reading?

It is plug/play but the connector for some reason is on the outer pin setting and it should be on the inner pin setting! Its really not a big deal at all!

07-31-2006, 06:37 PM	#89
EVO_S4 Colonel 117 Rep 2,232 Posts Drives: 2016 M3 Join Date: Apr 2005 Location: TN iTrader: (28) Garage List 2016 BMW M3 [0.00] 2009 BMW [8.24]	I going to pass on it, I got some family emergency to take care off, so no more mods for me for awhile __________________ 2016 M3 2016 Audi Q5 3.0T
	Appreciate 0 Quote

07-31-2006, 08:52 PM	#90
Bimmer325 Major 86 Rep 1,166 Posts Drives: 2006 E90 325i Join Date: Apr 2005 Location: MY iTrader: (1)	hey post some pics on your CF door pillars...both farther away & close-up pics as well..thanks too bad u dont want the MTEC. __________________ 325i Arctics M-Sport, Gray Leather with Alu Trim, ///M DCT Paddleshift, ///M Gear Knob, BBS LM-R 19", Michelin PS2, KW V2, H&R Anti Roll Bars, BMW Performance Air Intake System, 3D Front Lip, ACS Roof Spoiler, OEM Boot Spoiler, Osram 6000K, Brex White Ring, PIAA 6200K HID Fog, PIAA License Plate LED, BMS Powerbox
	Appreciate 0 Quote

08-01-2006, 12:17 PM	#92
ADHD Brigadier General 196 Rep 4,095 Posts Drives: F30 328i Join Date: Apr 2006 Location: Magic Mountain iTrader: (38) Garage List 21 M540i [0.00] 07 e90 335 [0.00]	MY wifey surprised me with these things!!!!! They just showed up at my door just now! :rocks: :rocks: :rocks: Hellz ya...ill be installing them tomorrow morning...ill let u all now how it goes! __________________
	Appreciate 0 Quote

08-01-2006, 03:39 PM	#93
poldim Vroom Vrrooooom 300 Rep 3,146 Posts Drives: 330i Join Date: Oct 2005 Location: Bay Area, CA iTrader: (2) Garage List 2006 330i Sedan [0.00] 2003 GSX-R 600 [0.00]	I'm bailing to. I'm going to France next week so I'll need the spare cash. __________________ -Dmitriy 06' BMW 330i & 03' Suzuki GSX-R600 SG \| Beige Dakota \| Poplar \|\| iDrive w/MP3 \| PP \| SP \| CWP \| PDC \| Comfort \| Shades \|\| 40% Tint \| Black Line Tail Lights \| Hardwired V1
	Appreciate 0 Quote

08-02-2006, 08:40 AM	#94
Bimmer325 Major 86 Rep 1,166 Posts Drives: 2006 E90 325i Join Date: Apr 2005 Location: MY iTrader: (1)	its OK guys, need not give an excuse...no binding at all! As i said earlier, if you can find better/equivalent price in the States, why not! Need not source from afar on the other part of the globe...GL with the install. So, i'm calling it off this GB is closed for good. __________________ 325i Arctics M-Sport, Gray Leather with Alu Trim, ///M DCT Paddleshift, ///M Gear Knob, BBS LM-R 19", Michelin PS2, KW V2, H&R Anti Roll Bars, BMW Performance Air Intake System, 3D Front Lip, ACS Roof Spoiler, OEM Boot Spoiler, Osram 6000K, Brex White Ring, PIAA 6200K HID Fog, PIAA License Plate LED, BMS Powerbox
	Appreciate 0 Quote

08-02-2006, 10:09 AM	#95
poldim Vroom Vrrooooom 300 Rep 3,146 Posts Drives: 330i Join Date: Oct 2005 Location: Bay Area, CA iTrader: (2) Garage List 2006 330i Sedan [0.00] 2003 GSX-R 600 [0.00]	I havent found a better deal, and even if I did, I'm sure the difference would be ~5 bucks. Something not worth going through someone else that doesnt have nearly 500 posts on this forum. If you can do this in 3 to 4 weeks when I come back I'm in. __________________ -Dmitriy 06' BMW 330i & 03' Suzuki GSX-R600 SG \| Beige Dakota \| Poplar \|\| iDrive w/MP3 \| PP \| SP \| CWP \| PDC \| Comfort \| Shades \|\| 40% Tint \| Black Line Tail Lights \| Hardwired V1
	Appreciate 0 Quote

08-02-2006, 08:25 PM	#98
ADHD Brigadier General 196 Rep 4,095 Posts Drives: F30 328i Join Date: Apr 2006 Location: Magic Mountain iTrader: (38) Garage List 21 M540i [0.00] 07 e90 335 [0.00]	http://www.e90post.com/forums/showth...888#post384888 __________________
	Appreciate 0 Quote

08-02-2006, 09:46 PM	#100
Caster Lieutenant 28 Rep 597 Posts Drives: 06 SG 325i Join Date: Apr 2006 Location: LA, Cali iTrader: (0) Garage List 2006 325i [0.00]	Sounds like it, if anyone is interested Invision Auto is offering the kit for $295 shipped, just drop them an email =] __________________ Graphite E90 325i / Navigation / Premium / Xenon / LUX White Rings / 15% Tint / Blackline Tail Lights
	Appreciate 0 Quote