N54 Powerglide

Brule · 03-09-2020, 10:57 PM

Oh I forgot Ive got a 7675 to go on.

Socket · 03-10-2020, 12:38 AM

lol nice

how much boost you planning to run ?

Brule · 03-10-2020, 12:54 AM

Just see how the engine reacts.
Wastegate is 14psi.

Brule · 03-10-2020, 06:32 AM

Installed anti lag and the car starts. Installed 2 step multiple times checking it over but it still won't fire with 2 step installed.

Tried
Removing and reinstalling
Checked clutch wires needed for starting the car they are fine
Pulled the relay apart to look inside, the wire is not broken.
Changed menu 8 rpm limit to 3000rpm it was on 0.
Next I'll try new firmware but it wont make it start.
Im not sure if the ecu cares that the car is always seen as in 0 gear this might be an issue starting and will be for setting antilag boost amount and boost for 1st and 2nd gear.

Coupes33 · 03-11-2020, 12:00 AM

I hope you can sort it out in time for the drags. Sounds like you still have a bit to do.

Brule · 03-11-2020, 12:04 AM

Ill just pull the 2 step and it is ready.
I think I have to flash it with tbe right numbers for the gear ratios it has and having the clutch wires hooked up as a switch must be trigering the 2step to kill the engine.

If carona doesnt shut the drags down ill be there.

Brule · 03-11-2020, 03:53 AM

Got 2 step and antilag working.
Only tested while stationary.

Now I need to set up the flash to read what gear im in. It always thinks its in neutral.

Brule · 03-12-2020, 03:07 AM

Got a new turbo. Ill put it in after next weeks drag test and tune meet.

Might actually bolt on.
worse case adjust exhaust and pipe to intercooler.[IMG]undefined[/IMG]

Brule · 03-12-2020, 03:09 AM

Next step will be stage 4 DAW turbos when I want to go fast.

Aus335iguy · 03-12-2020, 03:53 AM

That thing come of an airbus or what ?

This is gonna be epic.

Brule · 03-12-2020, 06:23 PM

Should fly.
Cant wait.

Aus335iguy · 03-13-2020, 04:10 AM

I like how you say
" blah blah horsepower.... ........... ..........Australian horsepower" 😎🇦🇺

Brule · 03-14-2020, 03:25 AM

Looks like my post didnt work. It was detailed and long.

shorty story.
got tyres, 2 dont fit.
anti lag works and is awsome
2 step wont work normal ways due to transmission
wrecked a tyre

added photo of turbo cause its good

Coupes33 · 03-14-2020, 04:04 PM

Is the problem with the tyres, the offset on the rim?

Brule · 03-14-2020, 04:16 PM

Nah, maybe I supose.

I shouldnt of ordered 275 40
Ive had 245 45 and they fit.

These ones are pretty big.

275 40 hossiers fit si yeah thr offset needs to go in 10mm and they would be good.

Ill adjust toe in a bit as they look different currently.
Hopefully it does not crab along the track next wknd.

Brule · 03-14-2020, 04:18 PM

Roll racing was announced yesterday in 6 weeks.
Dam i need port injection

Socket · 03-14-2020, 11:02 PM

Quote:

Originally Posted by Brule

Roll racing was announced yesterday in 6 weeks.
Dam i need port injection

I gonna put my Evolution Of Speed Intake Manifold with PI nozzles and hardness etc up for sale if you need a kit Brule

Brule · 03-15-2020, 02:42 AM

Cheers for the offer.

Ill have to hold off for now.
Cant afford it at the moment.
Going to get the 7675 on and play with that.

Might sell the turbo setup I have now then Ill buy a port injection setup.

Brule · 03-17-2020, 12:04 AM

Changed some settings trying to get fuel it blue tooth working.
Now car wont start.
Last time it wouldnt start with wmi set 1. I set to 0 and started.
Menu 8 on 0 so i could go wot without 2 step kicking in.

Now i have wmi 0 and car wont start.

Been trying for an hour or so changing all types of settings to get it to start.
Really starting to hate jb4.

Brule · 03-17-2020, 01:36 AM

Removed 2 step still wont start.
Pulled 10 or so fuses out to see if any were blown.

Might have to remove jb4 to trouble shoot.
I love jb4

Brule · 03-17-2020, 02:40 AM

Think ive fried something.
I didnt even flinch today but I earthed out a power wire going into jb4 today.
Accidentally earthed a 5v wire (5v from fuel it bluetooth output) going to input 15.

Probably shouldn't of and have stuffed a fuse or board ecu ect not sure.

N54 life.

Brule · 03-17-2020, 07:33 PM

Opened jb4 nothing blown by the looks of it.

Noticed lpfp and hpfp on start up drop back to just about zero.

While cranking lpfp starys at 10psi and builds to 68psi in 2 seconds. Hpfp is similar starts 1psi builds to 1200psi.

Wint start and both pressures drop back to nearly nothing.

Pulled both sides of lpfp setup. All pumps and pipes are still on. Lpfp fuse is still ok.

Need to check other 2 lpfp fuses..

03-09-2020, 10:57 PM	#155
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Oh I forgot Ive got a 7675 to go on.
	Appreciate 1 Aus335iguy650.00 Quote

03-10-2020, 12:38 AM	#156
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	lol nice how much boost you planning to run ?
	Appreciate 0 Quote

03-10-2020, 12:54 AM	#157
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Just see how the engine reacts. Wastegate is 14psi.
	Appreciate 1 Aus335iguy650.00 Quote

03-10-2020, 06:32 AM	#158
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Installed anti lag and the car starts. Installed 2 step multiple times checking it over but it still won't fire with 2 step installed. Tried Removing and reinstalling Checked clutch wires needed for starting the car they are fine Pulled the relay apart to look inside, the wire is not broken. Changed menu 8 rpm limit to 3000rpm it was on 0. Next I'll try new firmware but it wont make it start. Im not sure if the ecu cares that the car is always seen as in 0 gear this might be an issue starting and will be for setting antilag boost amount and boost for 1st and 2nd gear.
	Appreciate 0 Quote

03-11-2020, 12:00 AM	#159
Coupes33 Major 374 Rep 1,392 Posts Drives: 2006 335i, 2017 Audi S3 Join Date: Aug 2013 Location: Brisbane, QLD, Australia iTrader: (0)	I hope you can sort it out in time for the drags. Sounds like you still have a bit to do.
	Appreciate 0 Quote

03-11-2020, 12:04 AM	#160
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Ill just pull the 2 step and it is ready. I think I have to flash it with tbe right numbers for the gear ratios it has and having the clutch wires hooked up as a switch must be trigering the 2step to kill the engine. If carona doesnt shut the drags down ill be there.
	Appreciate 0 Quote

03-11-2020, 03:53 AM	#161
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Got 2 step and antilag working. Only tested while stationary. Now I need to set up the flash to read what gear im in. It always thinks its in neutral.
	Appreciate 1 Aus335iguy650.00 Quote

03-12-2020, 03:07 AM	#162
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Got a new turbo. Ill put it in after next weeks drag test and tune meet. Might actually bolt on. worse case adjust exhaust and pipe to intercooler.[IMG]undefined[/IMG] Attached Images
	Appreciate 1 Aus335iguy650.00 Quote

03-12-2020, 03:09 AM	#163
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Next step will be stage 4 DAW turbos when I want to go fast.
	Appreciate 0 Quote

03-12-2020, 03:53 AM	#164
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	That thing come of an airbus or what ? This is gonna be epic. __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

03-12-2020, 06:23 PM	#165
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Should fly. Cant wait.
	Appreciate 1 Aus335iguy650.00 Quote

03-13-2020, 04:10 AM	#166
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	I like how you say " blah blah horsepower.... ........... ..........Australian horsepower" 😎🇦🇺 __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

03-14-2020, 03:25 AM	#167
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Looks like my post didnt work. It was detailed and long. shorty story. got tyres, 2 dont fit. anti lag works and is awsome 2 step wont work normal ways due to transmission wrecked a tyre added photo of turbo cause its good Attached Images
	Appreciate 0 Quote

03-14-2020, 04:04 PM	#168
Coupes33 Major 374 Rep 1,392 Posts Drives: 2006 335i, 2017 Audi S3 Join Date: Aug 2013 Location: Brisbane, QLD, Australia iTrader: (0)	Is the problem with the tyres, the offset on the rim?
	Appreciate 0 Quote

03-14-2020, 04:16 PM	#169
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Nah, maybe I supose. I shouldnt of ordered 275 40 Ive had 245 45 and they fit. These ones are pretty big. 275 40 hossiers fit si yeah thr offset needs to go in 10mm and they would be good. Ill adjust toe in a bit as they look different currently. Hopefully it does not crab along the track next wknd.
	Appreciate 0 Quote

03-14-2020, 04:18 PM	#170
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Roll racing was announced yesterday in 6 weeks. Dam i need port injection
	Appreciate 0 Quote

03-15-2020, 02:42 AM	#172
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Cheers for the offer. Ill have to hold off for now. Cant afford it at the moment. Going to get the 7675 on and play with that. Might sell the turbo setup I have now then Ill buy a port injection setup.
	Appreciate 0 Quote

03-17-2020, 12:04 AM	#173
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Changed some settings trying to get fuel it blue tooth working. Now car wont start. Last time it wouldnt start with wmi set 1. I set to 0 and started. Menu 8 on 0 so i could go wot without 2 step kicking in. Now i have wmi 0 and car wont start. Been trying for an hour or so changing all types of settings to get it to start. Really starting to hate jb4.
	Appreciate 0 Quote

03-17-2020, 01:36 AM	#174
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Removed 2 step still wont start. Pulled 10 or so fuses out to see if any were blown. Might have to remove jb4 to trouble shoot. I love jb4
	Appreciate 0 Quote

03-17-2020, 02:40 AM	#175
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Think ive fried something. I didnt even flinch today but I earthed out a power wire going into jb4 today. Accidentally earthed a 5v wire (5v from fuel it bluetooth output) going to input 15. Probably shouldn't of and have stuffed a fuse or board ecu ect not sure. N54 life.
	Appreciate 1 Aus335iguy650.00 Quote

03-17-2020, 07:33 PM	#176
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Opened jb4 nothing blown by the looks of it. Noticed lpfp and hpfp on start up drop back to just about zero. While cranking lpfp starys at 10psi and builds to 68psi in 2 seconds. Hpfp is similar starts 1psi builds to 1200psi. Wint start and both pressures drop back to nearly nothing. Pulled both sides of lpfp setup. All pumps and pipes are still on. Lpfp fuse is still ok. Need to check other 2 lpfp fuses..
	Appreciate 0 Quote