|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Solid LED on K+DCAN cable
|
|
10-04-2014, 09:37 AM | #1 |
New Member
3
Rep 27
Posts |
Solid LED on K+DCAN cable
I bought a cable from OBD innovations to use with BMWLogger S/W. Plugging it in to either the USB port on my laptop OR the OBD port the LED light goes immediately solid.
I think when I first plugged it in it flashed. So I'm wondering if the LED should be now solid all the time when plugged in. Thoughts? |
10-08-2014, 06:48 PM | #2 |
BMW Enthusiast
35
Rep 79
Posts
Drives: 07 335i E92
Join Date: Apr 2014
Location: Canada
|
The led light on my cable stays on for a bit but then turns off regardless to where I have it plugged in (car or pc).
Seeing the screenshot however, I can tell you that the correct drivers haven't been installed. You'll need to sort that out first. FT232R USB UART needs to be recognized as usb device host/controller and show up under Ports category. |
Appreciate
0
|
10-09-2014, 08:16 AM | #3 |
New Member
3
Rep 27
Posts |
dj_aj: Thanks. Yeah, i knew the drivers weren't installed. I was just confused about the LED being lit when the drivers weren't installed. I would think if drivers weren't installed the cable would not be unrecognized therefore how would it know to light the LED. I'm guessing though its a physcial connection off a 5V line?
|
Appreciate
0
|
10-09-2014, 08:39 AM | #4 |
BMW Enthusiast
35
Rep 79
Posts
Drives: 07 335i E92
Join Date: Apr 2014
Location: Canada
|
Yep. That led indicator is powered through the usb port. It'll also light up when you plug it into the OBD port, without it being connected at the other end.
|
Appreciate
0
|
10-25-2014, 12:38 PM | #5 |
Private
23
Rep 82
Posts |
If you doubleclick on the device as you have it in your picture above in device manager.
Then go to the "Details" tab, you will see: "Device instance Id" Please copy & paste the string listed in your next reply (You can click on it and press CTRL+C to copy) Also please let us know what driver version you are using. |
Appreciate
0
|
10-27-2014, 10:05 AM | #6 | |
New Member
3
Rep 27
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|