|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N52B30 in different version 1/X3/X5/6series
|
|
10-06-2016, 02:53 AM | #1 |
Lieutenant
336
Rep 451
Posts
Drives: X1 U11 30e
Join Date: Dec 2011
Location: Bulgaria
|
N52B30 in different version 1/X3/X5/6series
Hi Everyone,
I would like to bring one question which is in regards to this engine - N52b30 and IS there any difference in different models. For example the same engine : 190 kW Applications: 2008-2011 E89 Z4 sDrive30i 2009-2011 E84 X1 xDrive28i 2009-2012 E87 130i 2004-2008 E90/E92/E93 330i, 330Ci, 330xi 2005-2009 E60/E61 530i, 530xi 2004-2007 E63/E64 630i 195 kW Applications: 2005-2008 E85/E86 Z4 3.0si 2006-2009 E87 130i hatchback 200 kW Applications: 2006–2010 E83 X3 3.0i 2006-2010 E70 X5 3.0si, xDrive30i 2007-2010 E63/E64 630i Is there a way to change my software on the E90 330i with the one from 6 series so I can use the obvious full potential of the engine,my car is EU spec so i dont think there are mechanical differences between mine and 6 series engine. Any ideas? |
10-06-2016, 09:15 AM | #2 |
Major General
3980
Rep 7,212
Posts |
Be careful that you aren't comparing to the N53B30.
The factory tunes are basically identical. It appears to be the exhaust that is different on the higher output engines (like the 3.0si), giving them slightly more power. But you aren't going to get that by flashing to a different software. Also, you couldn't take the software from an E63 and just flash it to your E90. There are a lot of parameters for each specific chassis, that would be incorrect for the E90. It probably wouldn't start or would be in limp mode with errors. |
Appreciate
0
|
Bookmarks |
|
|