[FEDE/E92]

Just wanted to give huge thanks to BIMMERGEEKS!!! Communication/customer service was just second to none. Needed help with setting up for coding, took the time to show me how to and not only that but walk me through step by step of actual coding. Made this coding/ communication process just a breeze thank you so much for all the help and keeping me from smashing my laptop lol. Save yourself the headache and contact BIMMERGEEKS!!!!!

[ENowlin35]

I want to thank BimmerGeeks for their help on a project I just completed. I just finished a SMG to manual swap on my 2003 Z4 3.0i. While this is a fairly common project on the M's, there was no information to be found online on the Z4. Ultimately, the swap came off without a hitch, but, my problem occurred with the process of flashing the proper coding onto my ECU. Since I don't handle programming, I took the car to a BMW specialist shop to do the programming. They had the car for over a week before telling me that, even with the help of Autologic, they could not get the ECU programmed. I then took the car to another BMW specialist who, after having the car several more days, said he could not complete the programming using ISTA, etc. Finally, I found BimmerGeeks online and decided to give them a shot. I took the car to them and within 45 mins, the programming was completed and everything (cruise control, etc) worked perfectly and no more SMG lights, service lights or error codes were present. BimmerGeeks amazed me with their knowledge and professionalism. Thanks to them for helping me complete my project!

[Flyboy161]

I'll throw my two cents in here as well! He's an awesome guy, very tech savvy and a real pleasure to deal with. Really helped me out!

[The335iGuy]

Bimmergeeks are awesome. I reached out to them and nearly right away got a response and they were ready to code my car. They helped me out tremendously and even though I didn't have everything set up right they were patient, worked through it with me, and still got my car coded in less than 20 min.

Big shout out to bimmergeeks I can't recommend them enough.

[mike@x-ph.com]

I will start by saying that me or Extreme Power House are not in any way shape or form affiliated with Bimmer Geeks.

I was getting three error codes on my BMW E92 335
Adaptive headlights
left turn signal
right low beam

A friend and i worked on coding the car and took care of the first 2 errors.
For some reason no matter what we did, right low beam would not go away.

I contacted a guy in CA but every time it was time to actually do the job, the guy disappeared and stopped replying to my messages. 2 weeks later i gave up.


Today i was on the forums and saw this thread, so i contacted Bimmer Geeks.
He replied within minutes and sent me his phone number.
I called him and explained to him whats going on.
He sent me a link with files to download ... Once i downloaded the files, we did a screen share and he took care of everything else.
He never even once asked for money or mentioned the price. I did not even know how much its going to cost me until he was already done and error was gone.

I was literally having dinner while he was working on my pc. Within 10-15 minutes he fixed the issue. He even went the extra mile and uninstalled all the programs that we downloaded.

His fee was more than reasonable, i was surprised how cheap this whole thing turned out to be (It has been stressing me out for the last 3 weeks)

As a business owner myself, i value good customer service and Bimmer Geeks have awesome support. Good job guys

[henry418]

BimmerGeeks flashed the Alpina and PPK flash for me at a very reasonable price (in fact, lower price than any other coders I contacted for the same work). No problems whatsoever and great customer service. Recommend others to contact him for coding needs, you won't be disappointed

[3sChuck]

definitely recommend BimmerGeeks to any one looking for a professional and quick coder. Responds fast and works even faster thanks again

[igzekyativ]

another shout out to bimmergeeks, hooked it up with an FRM>FRM2 upgrade and some coding options. great to work with!

[charlie fairmont]

Another shout-out. Super helpful in getting me all set up. Clearly knows his stuff () and I'll be a repeat customer the next time I'm up against computer issues. Highly recommend BimmerGeeks!

[Netspec]

BimmerGeeks truly knows his stuff and I can't wait to work with him on my car! I really appreciated his hard work in getting all the software installed.

[Nsb335i]

I contacted two different coders before reaching out to bimmerGeeks neither knew how to fix my problems.. 30 minutes later all my issues were solved and he went the extra mile to explain to me what might be causing my other issues. Great guy!! Goto him first!

[BobsBimmer]

I too would like to give a shout out to bimmergeeks!! We had some issues, but he stuck with me and talked me through everything! Highly recommended using this guy!! Class act!!

[titsataki]

Another shout out to Bimmer Geeks. He took care of me.
Installed the software and coded my car.
thank you for helping out and sticking around the extra time.

I will ping you for the other car coding

Regards

Nick

[cwbmw]

Am in the works trying to get my FRM3 diagnosed and possibly replaced. He has already been a tremendous help and I'm confident once I get the software working he'll be able to help me out further!

[EvanTheBruce]

Huge thanks to bimmergeeks for coding out my SMC on such short notice!

[JB4N]

Just got my DME updated from BimmerGeeks! Great guy to work with and everything went smooth and easy. I will respond back once I drive the car but hopefully this fixes my problem! Highly recommend BimmerGeeks!

[blisstik]

Another shout to BIMMERGEEKS. Responded to my n00b questions promptly.

[Awsm66]

Shoutout to BimmerGeeks. They cleared my license plate error in my FRM (wires shorted in the boot leading to the trunk). They also updated some CIC features on another e90 I have.

I could not be more happy with their customer service and the great, quick work they did on the cars. I would highly recommend them and will be using them again once I get a CIC installed in one of my cars.

Thank you again for the great work!

[OneSickM]

Thank you for helping me in recovering my car.

As all of you know, I tried to code my car (BMW e92 M3) with $100 Brand cable. I tried to flash DME using that cable and I got the infamous "Signature Error" and DME was locked and couldn't start the car anymore. Of course it was my bad for not doing the proper research before coding the car.

Bimmergeek jumped in called me and sent me the "magic" cable ASAP. Once I got cable, he logged in with teamviewer to do the flash and did the trick by flashing the ECU/DME and my car is back and running ...boom!!

Damn! I thought I bricked my DME and I have to spend $700 to get a new DME but with his cable, he saved me!!

Anyone wants to flash his car MUST use this cable. Don't do my mistake and use a BRAND cable or you will be stuck with car not running..

THANK YOU BIMMERGEEK !!

[lucasmiller2015]

Had BimmerGeeks code my FRM3 and he was great! Quick, easy, and a great deal. 10/10 would recommend.

[gqbriel]

Had BimmerGeeks done an EGS update with a new soft ,he did it remotely in 5mins - excellen communication,work - perfection .
Huge THANKS!!!

[Katkarot]

I want to thank BimmerGeeks for their fantastic work this afternoon on my 135i. I had them update the DME and DCT modules, install PPK and a few custom coding features! All I can say is that they went above and beyond what I expected in the service they provided. They patiently setup the software to coding the modules and features.

Their work is excellent and I highly recommend them!

Big thank you to BimmerGeeks!