[Lucios]

Hello guys i have a problem with ncs expert and I need your help.
I was trying to code my 2009 e90 bmw 320d to let the windows roll up with one touch when open the door (normally it stops when you open the door).
So these are the steps I followed in NCS expert:
NFRM module--> read ecu-->modified FSW_PSW.trc with bmw coding tool (changed FH_TUERAUF_STOP_MAUT_3R to nicht_aktiv) and saved .MAN file-->in ncs expert change job to sg_codieren and execute job.
Result is coding ended but then I found out that:
1 the front windows aren't working at all
2 the headlights stay on even if i put the switch off or in "position lights"
3 the key won't lock or unlock the car
4 high beams and turn lights not working
5 internal light remain on.
Fortunately i saved a copy of the original .MAN file but now i cannot read the NFRM module because NCS expert returns me a error when i do CODIERDATEN_LESEN. I will attach the error log to this post.
Guys i need your help because i screwed something up.
Thanks in advance and sorry for my english.

[Impac]

Is your device manager set to com (1) and Latency Timer (1)?
Did you code FRM with Low battery voltage ?

[Lucios]

Hello Impac, yes device manager is set to com 1 and latency timer to 1.
I don't know if battery voltage was low but the car starts without any issue, so i think battery is ok.

[Impac]

Any error faults in ista or inpa from frm?
Im not 100% sure but looks to me like you damaged your frm i could be wrong

[Lucios]

How can i check if there are any errors in inpa from frm?

[Impac]

Inpa
Your chassies
Functional jobs
Read error

[Lucios]

No errors. But FRM doesn't even show up.

[Impac]

Try to see if you can directly connect to frm with inpa, but so far it dont look good to me, maybe someone else can chime in

[Lucios]

Inpa can't connect with the frm module, so maybe the module is damaged. I will take the car to a bmw dealership to see what they can do. Thank you Impac.

[Vetienne]

Originally Posted by Lucios

Hello guys i have a problem with ncs expert and I need your help.
I was trying to code my 2009 e90 bmw 320d to let the windows roll up with one touch when open the door (normally it stops when you open the door).
So these are the steps I followed in NCS expert:
NFRM module--> read ecu-->modified FSW_PSW.trc with bmw coding tool (changed FH_TUERAUF_STOP_MAUT_3R to nicht_aktiv) and saved .MAN file-->in ncs expert change job to sg_codieren and execute job.
Result is coding ended but then I found out that:
1 the front windows aren't working at all
2 the headlights stay on even if i put the switch off or in "position lights"
3 the key won't lock or unlock the car
4 high beams and turn lights not working
5 internal light remain on.
Fortunately i saved a copy of the original .MAN file but now i cannot read the NFRM module because NCS expert returns me a error when i do CODIERDATEN_LESEN. I will attach the error log to this post.
Guys i need your help because i screwed something up.
Thanks in advance and sorry for my english.

Good day, have you found a solution to this problem???

[Sensible_]

Looks like the FRM is dead to me

[Bmwneedsworkagain]

On some models including E90 the FRM has 10 years warranty in the US. The dealer foreman told me not to do any updates to it as he's seen lots of them get bricked. Don't touch the FRM if you can avoid it.

Read this SIB for details:
https://bimmerscan.com/wp-content/up.../B012016-1.pdf

[Martinxeneize]

Hello im having this exact issue after trying to change my DRLs onto angel eyes. Did you find a solution?

[sdbmwcoding]

Originally Posted by Martinxeneize

Hello im having this exact issue after trying to change my DRLs onto angel eyes. Did you find a solution?

Is your build date 03/07+