[E90N52Fan]

For reference, the vehicle is a 2011 BMW E90 328i XDrive, with the Xenon headlights (non-adaptive). Any one would happen to know the part number for this connector that goes from the D1S bulb to the ballast? Thank you in advance, Please see attached diagram.

[Cal122]

Looks like it might be 63117175037 for the wire, if you run your VIN through realoem.com you should be able to confirm.

[E90N52Fan]

Originally Posted by Cal122

Looks like it might be 63117175037 for the wire, if you run your VIN through realoem.com you should be able to confirm.

I tried looking for it there, the part you sent was for the pre LCI ballast where the connectors are separated. This is the diagram from realoem and BMW, don't see the connector as a part.

[pedro2u]

+1 on Cal122's post:

If I search the web for 2011 BMW Xenon headlight ballast cable, FCP shows this:

BMW Xenon Bulb Connector - Genuine BMW 63117175037 ????

https://www.fcpeuro.com/products/bmw...RoCrGwQAvD_BwE

[E90N52Fan]

Originally Posted by pedro2u

+1 on Cal122's post:

If I search the web for 2011 BMW Xenon headlight ballast cable, FCP shows this:

BMW Xenon Bulb Connector - Genuine BMW 63117175037 ????

https://www.fcpeuro.com/products/bmw...RoCrGwQAvD_BwE

That connector is for the pre-LCI ballast, a completely different design, and fitment.

[E90N52Fan]

See pictures of old ballast, vs new ballast with the LCI. Old ballast uses the cable part number mentioned above, and is mounted to the bottom of the headlamp. New ballast (LCI) is mounted on the side of the headlamp, and the connection is different. This "double square" cable is what I am looking for. But thank you both for reply and trying to help. For some reason, I cant find the equivalent for this new design.