[treycullison57]

I bought a 2006 bmw 330xi with a manual transmission and I am getting error lights showing brake light, abs light, wheel sensor light, and triangle light. The car is now only rwd. I am getting multiple codes.
539E VTG
5F13 DSC
5F39 DSC
A3B2
E194
9CC1

I replaced the transfer case actuator and tried to recalibrate it with my launch scanned. I thought the bmw software to do it. I kept getting the error resister invalid and I wasn’t able to calibrate the actuator.

Is anyone able to help me, I really wanted to get my awd working before it snowed but I’m not sure that’s going to happened
Thanks!

[ctuna]

There is and entire x drive sub forum here.
xdrive sub forum in the following link
https://www.e90post.com/forums/forumdisplay.php?f=16

https://www.e90post.com/forums/forumdisplay.php?f=197




bmw boards and links
https://www.bimmerfest.com/forums/forumdisplay.php?f=99
https://www.e90post.com/forums/forumdisplay.php?f=27
https://www.e90post.com/forums/forumdisplay.php?f=2
https://www.e90post.com/forums/forumdisplay.php?f=122
https://bimmerretrofit.com/store/
https://www.e90post.com/forums/forumdisplay.php?f=197
https://www.e90post.com/forums/forumdisplay.php?f=378
https://www.e90post.com/forums/forumdisplay.php?f=16
https://www.e90post.com/forums/forumdisplay.php?f=368

[treycullison57]

Thank you very much!

[ctuna]

If you can you are better of getting a copy if BMW Standard Tools
and Ista D which uses a windows laptop and K/D can cable

See the coding subforum for more info on this.

Also the info in the attached link will be enlightening

[cosmo325xi]

I have the same issue and am replacing the motor. Did you end up getting it calibrated?

[treycullison57]

No I have not been able to figure it out