Sponsored by The Tire Rack

[335iArchitect]

19" Miro 111
Front: et 35 w/ 10mm spacers & lowering perches
Rear: et 33 w/ 5mm spacers & rolled fenders

Tires: Falken 452's, 235/35/19 & 275/30/19

The BMW emblems are stickers, stock centers don't fit the 111's.

Thanks to Alan at Modbarginas for the great deal, fast shipping, and excellent customer service. Enjoy!

Other Mods: Stett CAI, BMW Performance SSK, Angel i-Brights,
Future Mods: JB4 & Titek 3" downpipes

[ModBargains.com]

The Miro 111 wheels look great on the car Tahir. Thanks for posting up pictures and sharing them with the rest of the community

[remmib]

Very nice.

[Projekt_BooGie]

very nice, question.... Did you have to roll the rear fenders b/c of the 5mm spacer or did you just to it to be safe, and 2) did you get extended studs??

[335iArchitect]

Originally Posted by ACEE

very nice, question.... Did you have to roll the rear fenders b/c of the 5mm spacer or did you just to it to be safe, and 2) did you get extended studs??

Thanks for the compliments!

Without the 5mm spacer and the roll, the wheels fit well, but not flush. The same goes for the front. But yes, it's best to roll the fenders to run 5mm spacers with this offset. Actually with the roll, I can probably get away with 10mm spacers in the rear...But I didn't push it.

The spacers are Macht Schnell, purchased from eas. They are extremely high quality, and both 5mm and 10mm spacers come with extended studs. Go ahead and get the extended bolts for the 5mm, some say you dont need it....but why risk it?

[Projekt_BooGie]

Originally Posted by 335iArchitect

Thanks for the compliments!

Without the 5mm spacer and the roll, the wheels fit well, but not flush. The same goes for the front. But yes, it's best to roll the fenders to run 5mm spacers with this offset. Actually with the roll, I can probably get away with 10mm spacers in the rear...But I didn't push it.

The spacers are Macht Schnell, purchased from eas. They are extremely high quality, and both 5mm and 10mm spacers come with extended studs. Go ahead and get the extended bolts for the 5mm, some say you dont need it....but why risk it?

thanks for the info. I know everyone wants to be stanced and flush but I want to push it as close as I can without rolling and possibly no extended studs. But I'll have to wait until I get everything to make the final decision.

Good luck with future mods

[Z_Monzter]

Originally Posted by 335iArchitect

19" Miro 111
Front: et 35 w/ 10mm spacers & lowering perches
Rear: et 33 w/ 5mm spacers & rolled fenders

Tires: Falken 452's, 235/35/19 & 275/30/19

The BMW emblems are stickers, stock centers don't fit the 111's.

Thanks to Alan at Modbarginas for the great deal, fast shipping, and excellent customer service. Enjoy!

Other Mods: Stett CAI, BMW Performance SSK, Angel i-Brights,
Future Mods: JB4 & Titek 3" downpipes

Can you please tell me where did you buy the BMW Stickers for the center caps and how much did they cost?

Edwin