[turb0mik3]

As all of you probably know and keep hearing, I (well, Fred from ER) undertook one of the most difficult projects ever on e90post in custom fabricating a bolt-on, one of a kind, FIRST EVER, e90/e92 roll bar. He did me a huge favor in taking on this project because I have bought from him numerous times and we have formed an awesome friendship. I can't speak highly enough about their project and work ethic. Well, on to the pictures!!!

It all started with a couple teasers sent via Fred's cell phone two weeks back...

Then this past Friday I visited ER to help then finalize the whole project. We were there from 12pm to 1am getting everything finished. Fred and Rigo are dedicated workers and didn't have to work a 13 hour day, but are good friends and wanted to see it finished!!! Go boys!!!

^All in love boys

^Fred using his awesome welding skills

^Installing the seats were a pain in the ass. No offense to EAS, but all of their anchors for a 6pt harness are for regular racing seats, not XL versions. They should probably make a set for the taller driver...

Also note that I will have the roll bar pulled next week before the LTBMW meet to have powdercoated matte black. Fred also has a couple more welds to make but he wanted me to test the rigidity and make sure everything was perfect, WHICH IT IS!!!

So the labor lasted 13 straight hours and the project was finally complete. However, I was not finished. I happen to call Ivan from LTBMW to see if they had any CF LCI front lips and low and behold, BINGO!!!

I wanted a fully functioning front lip. I wanted the splitter to cover the whole front quarter of the car and it did. I also wanted APR braces to make sure that it would not rip off at speeds in excess of 140mph.

Big ups to LTBMW for making the most amazing front end of an e90 LCI on this planet (in my opinion ). I haven't really done a lot of work with Long and Ivan except talk to them over meets and what not. Really great guys and they really have the cosmetic touch, as you can see with numerous rides around the forums!

The Results:
CF LCI front lip w/ FULL APR splitter & braces



^Fully functioning!!!

I am not a good photography, but I managed to catch some pretty dope night shots and some ok day shots in the driveway.

The whole setup isn't complete for I still need to powdercoat the roll bar, mount the side harnesses, and...Varis Wing from Andrew@IND. But take a look.

Modification list is below...

And without further adu, here Blue is, track prep'd and ready to roll...

ENJOY!!!!!!

[IMG]http://www.flickr.com/photos/*****dn54ftw/6173715365/[/IMG]





Favorite Sticker EVAR!!!

2010 BMW 335i
23,000 miles
Premium Package
M-Sport Package
6-Speed Manual
I-Drive
I-Pod connector
Bluetooth


Exterior
-Full M-Sport Package
Front Bumper
Side Sills
Rear Bumper
-LTBMW CF Diffuser w/ APR splitter and braces
-Duke Dynamics Carbon Fiber Rear Diffuser
-Bavarianx FULL LED HALO replacement
-Black Grills
-Painted Reflectors
-Liscence Plate LEDs
-Debadged
-4" MagnaFlow Dual Exhaust tips
-Nokya 2k fogs

Interior/Audio
-Recaro Profi XL (w/ custom Royal Blue Alcantera inserts)
-Sparco 3" 6pt Camlock Harnesses
-IND Shifter Extension
-BMW Alcantara Shift Boot (Custom blue stitching)
-M-Sport Interior
Steering Wheel
Rocker Panels
Aluminum Trim
-Full LED Conversion
-Focal 100VRS
4" mid/sub & Magnesium plated tweeters
-Alumapro 10" Alchemy H20 Subwoofer
Custom CarbonFiber banpass box
-Arc Audio KS500.1 Amplifier
Custom mounting and viewing window
-JL Audio Cleansweep CL441

Wheels/Brakes/Suspension
-Forgestar F14 Gunmetal (street)
19x9.0 F et30 w/ Hankook Ventus V12 Evo 245/35-19
19x10 R et30 w/ Hankook Ventus V12 Evo 275/30-19
-DForce LTW-5 Gunmetal (track)
18x9.5 F et42 w/ Hankook Ventus RS3 255/45-18
18x10 R et 45 w/ Hankook Ventus RS3 285/45-18
-Stoptech Trophy Sport BBK
(powdercoated T. Safety Yellow)
Front: ST60 (13.5" caliper w/ 355mm cross drilled rotors)
Rear: ST40 (10.5" caliper w/ 345mm cross drilled rotors)
-KW Varient 2 Coilovers w/SWIFT spring conversion (400F/800R)
-Vorshlag Camber Plates
-M3 Front Control Arm Kit
-M3 Strut Tower Brace
-M3 Rear Guide Rods
-M3 Rear Rear End links
-TC Kline Racing Studs
-Velocity Motorsports Adjustable Toe Links
-1.6 degrees Rear Camber

Performance
-Wavetrac 3.46 Limited Slip Differential
-GIAC Stage 2/2 race
-JB+ Boost adjuster (Up to 18 from 16)
-Evolution Racewerks Competition Intercooler
w/ Carbon Fiber Entry Shroud
-Evolution Racewerks Competition Dual-Oil Coolers
-Evolution Racewerks CUSTOM ONE OF A KIND roll bar powdercoated matte black
-Borla Race Exhaust (custom race cats)
-Macht Shnell 3" Coated Downpipes
-aFe Stage 1 intake
-Snow Performance Stage 2 Methanol Injection
-Evolution Racewerks Charge Pipe
-TIAL Blow Off Valve
-BSH Oil Catch Can
-Rogue Engineering SSK (w/ IND Shifter Extension)
-CDV Delete
-HPA LSD Cooler

[FLOSS]

wow

now u're talking!!!!

see u at the caravan next week, mike??

[E90MCF]

:confuse d0068:

[ibeclueless]

awesome!

[bpsu07]

I just love how you push your car to the limits! and track it!

[ryan970]

wouldnt it be cheaper to buy an m3 with all your mods.

[turb0mik3]

Originally Posted by FLOSS

wow

now u're talking!!!!

see u at the caravan next week, mike??

I will see you there James! Cruising over with Adam.

Originally Posted by bpsu07

I just love how you push your car to the limits! and track it!

Thanks!!! Tracking is more addicting than mod'ing, haha.

Originally Posted by ryan970

wouldnt it be cheaper to buy an m3 with all your mods.

This car is 200x more capable than an M3, haha. All respect to the M though!

[intensee92]

thats sick

[ryan970]

Originally Posted by Mflowt5

I will see you there James! Cruising over with Adam.



Thanks!!! Tracking is more addicting than mod'ing, haha.



This car is 200x more capable than an M3, haha. All respect to the M though!

yeah but a m3 is a m3, you know haha. anways sick car make some vids on the track.

[turb0mik3]

Originally Posted by ryan970

yeah but a m3 is a m3, you know haha. anways sick car make some vids on the track.

Exactly! You don't see this kind of performance in a 3er so it's cool to be different!!!

[mastermayhm]

soo dope

[sn0pea]

Have we ever met?
No?
Want to be my friend?

[theriz]

wow soo nice! hope to see you at LTBMW!!!!

[yamazaho]

Absolute sickness!!!! Great job man.

[j&g bimmas]

Now this is an agressively modded track/show car done right, and its a manual six speed!!

[E90Mario]

So sick!!

[asian010]

awesome! can u send me more pics of the front end with the splitter. ive been debating on the lip for sometime now and its great that ur car is lemans blue too lol.

[dmz]

Wow! that's a crazy modded 335i. Although, with all the money you spent, I would have started with a Porsche to begin with.

[shragon]

hardcore

[turb0mik3]

Originally Posted by MrTerryliu

awesome! can u send me more pics of the front end with the splitter. ive been debating on the lip for sometime now and its great that ur car is lemans blue too lol.

For sure, I am going to do a better photoshoot after the Varis wing.

Originally Posted by dmz

Wow! that's a crazy modded 335i. Although, with all the money you spent, I would have started with a Porsche to begin with.

Eh, i could have gotten a used Turbo but can you imagine the insurance on that? If anything, I would have gotten a Z06 or used GTR, but those are known supercars. I wanted to build my supercar. BUILT NOT BOUGHT playa!!!

[Phil325]

nice mods and car is coming out great. cant wait to see the teaser parts put on

[1fresh8]

So sick u need a cf roof next