CANNOT Update Software "For Communication and Entertainment" through USB

NYF32DRIVER · 03-24-2012, 11:43 AM

Any suggestions? I downloaded the software from the BMW website. I loaded it onto my otherwise empty BMW memory stick. When I connect it to the USB port in the armrest and select "Software Update" in iDrive, this is the message I get:

matrix76 · 03-24-2012, 11:50 AM

Not in the armrest, the usb port in the glove compartment on the left side.

NYF32DRIVER · 03-24-2012, 12:35 PM

Quote:

Originally Posted by matrix76

Not in the armrest, the usb port in the glove compartment on the left side.

Some have said this but the PDF with instructions I downloaded says NOT to use the glovebox port... I'll give it a try.

carjon · 03-24-2012, 07:58 PM

It didn't work for me in the glove box - only in the armrest USB port and it took putting it in and taking it out and back in several times for it to work for me.
Good thing about the arm rest since I found it almost impossible to get into the glove box USB.

richpike · 03-24-2012, 09:29 PM

Dumb question, but I've searched and searched and can't find anything on it - what is it you are trying to update? Is it a new software/firmware for iDrive? If so, can you post the link to it on BMW's website?

TIA,
Rich

cole92 · 03-25-2012, 12:42 PM

Quote:

Originally Posted by richpike

Dumb question, but I've searched and searched and can't find anything on it - what is it you are trying to update? Is it a new software/firmware for iDrive? If so, can you post the link to it on BMW's website?

TIA,
Rich

Probably the bluetooth/communications update. Only works on 2010 and up, or if you have the option for software update in your settings.

To the OP, make sure your drive is seated correctly and all the way in. You may need an extension to get it seated correctly.

mickcris · 03-25-2012, 12:58 PM

Is the drive formatted FAT32? Don't think it will be able to read it if not.

03-24-2012, 11:43 AM	#1
NYF32DRIVER Lieutenant 132 Rep 556 Posts Drives: 2016 428i X Drive Join Date: Feb 2006 Location: Long Island, NY, USA iTrader: (0)	CANNOT Update Software "For Communication and Entertainment" through USB Any suggestions? I downloaded the software from the BMW website. I loaded it onto my otherwise empty BMW memory stick. When I connect it to the USB port in the armrest and select "Software Update" in iDrive, this is the message I get: Attached Images __________________ 2016 428i X Drive. Mineral Gray Metallic. Born 2/2016, Munich Factory. Member BMW CCA Since 2008
	Appreciate 0 Tweet Quote

03-24-2012, 11:50 AM	#2
matrix76 Major 61 Rep 1,300 Posts Drives: 2020 Z4 M40i Black/Red Join Date: Sep 2009 Location: Port Dover, Ontario iTrader: (1)	Not in the armrest, the usb port in the glove compartment on the left side. __________________ Brian Black Sapphire, Black w/Burrwood Trim & Shifter, 162's, Mtec H8 AE's, DS1 HID 6000K
	Appreciate 0 Quote

03-24-2012, 07:58 PM	#4
carjon First Lieutenant 7 Rep 349 Posts Drives: 328xi Sedan Join Date: Feb 2006 Location: CT iTrader: (0)	It didn't work for me in the glove box - only in the armrest USB port and it took putting it in and taking it out and back in several times for it to work for me. Good thing about the arm rest since I found it almost impossible to get into the glove box USB. __________________ 2011 328xi black on black. Nav, connect, apps, Sirius.
	Appreciate 0 Quote

03-24-2012, 09:29 PM	#5
richpike Captain 29 Rep 713 Posts Drives: MDX, LR4 Join Date: Oct 2008 Location: CO - 6500ft ASL iTrader: (1)	Dumb question, but I've searched and searched and can't find anything on it - what is it you are trying to update? Is it a new software/firmware for iDrive? If so, can you post the link to it on BMW's website? TIA, Rich
	Appreciate 0 Quote

03-25-2012, 12:58 PM	#7
mickcris Private 3 Rep 49 Posts Drives: 2011 328i Join Date: Jan 2012 Location: dallas, tx iTrader: (0)	Is the drive formatted FAT32? Don't think it will be able to read it if not.
	Appreciate 0 Quote