![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
Fix a torn/ripped Wind Deflector (mesh fabric)
![]() |
![]() |
03-20-2014, 09:19 PM | #1 |
Registered
1
Rep 4
Posts |
Fix a torn/ripped Wind Deflector (mesh fabric)
Easy DIY - it's been holding up for a week, and I expect it to hold up well in the long-term.
The mesh (I presume polyester or nylon) fabric on the BMW e93 wind deflector (i.e., BMW part number 54347269437) is easily torn or ripped. I found a product that seems up to the job to fix at least smaller rips. My rip was about 1 inch by 1/4 inch, and close to the edge of the wind deflector. The product is Gear Aid Tenacious Tape (black). It is available through Amazon - get black! I simply followed the instructions on the package, severely over-estimated the size of the tear, and applied the tape as shown in the attached picture. If it holds up in the long term, then I won't touch it. If it starts to peel away, then I'll reapply with tape on both sides of the wind deflector fabric. If this happens, I will also cut the tape to a more appropriate size (I left it at it's natural width in the picture - too large for my rip). The color/fabric blends in quite well, and the tape is advertised as working well with mosquito netting and camping gear, so here's hoping it holds up! |
03-22-2014, 09:47 AM | #2 | |
Enlisted Member
![]() 15
Rep 44
Posts |
Quote:
Thanks :-) |
|
Appreciate
0
|
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|