HELP: Front BBK Enough Clearance??????

E90PC · 06-28-2011, 02:31 AM

Hope someone can help me out!!! My front wheels is 19x8.5 ET35 and I'm thinking of getting front BBK 6 piston with 355mm rotor (14") will I have enough clearance?

THANKS IN ADVANCE!!!!!!

wesborl898 · 06-30-2011, 12:37 AM

Quote:

Originally Posted by E90PC

Hope someone can help me out!!! My front wheels is 19x8.5 ET35 and I'm thinking of getting front BBK 6 piston with 355mm rotor (14") will I have enough clearance?

THANKS IN ADVANCE!!!!!!

which wheel?

TSM330i · 06-30-2011, 07:08 AM

You need to go to the brake manufacturers website. They will have a template for the brake that you can print out, cut out and then place it on the inside of your wheel to see if it clears.
You need to be concerned with barrel diameter of the wheel and the center offset to make sure it doesn't rub against the outside edge of the caliber.

Mr_PharmD · 06-30-2011, 09:28 AM

i was told BBS +32 offsets would fit stoptech 6pt fronts and 4 pts rear so +35 shouldnt be an issue.

06-28-2011, 02:31 AM	#1
E90PC Lieutenant 40 Rep 517 Posts Drives: E90 330i Join Date: Apr 2007 Location: Vancouver iTrader: (9)	HELP: Front BBK Enough Clearance?????? Hope someone can help me out!!! My front wheels is 19x8.5 ET35 and I'm thinking of getting front BBK 6 piston with 355mm rotor (14") will I have enough clearance? THANKS IN ADVANCE!!!!!! __________________ 06’ SG E90 \| Sport Package \| 35% Tint \| Mtec V3.0 Angels Eyes \| Blacklines \| 19" BBS LM Rep \| RPI Air Scoops \| RE Ikon Exhaust \| CF CSL Trunk \| CF ACS Roof Spoiler \| Hamann Eyelid \| Matte Black Grill \| OEM 335 Calipers & Rotors \| 3000k HID Foglight \| OEM Splitters + Hamann Style Lip \| CF Vinyl Trim *CF Vinyl Interior Trim*
	Appreciate 0 Tweet Quote

06-30-2011, 07:08 AM	#3
TSM330i 2006 330i, TSM, Black, manual, sport 878 Rep 3,699 Posts Drives: '17 C2, GTI, Z4 3.0si Racecar Join Date: Nov 2005 Location: Chester Springs, PA iTrader: (2)	You need to go to the brake manufacturers website. They will have a template for the brake that you can print out, cut out and then place it on the inside of your wheel to see if it clears. You need to be concerned with barrel diameter of the wheel and the center offset to make sure it doesn't rub against the outside edge of the caliber. __________________ 2017 Porsche C2 - manual of course 2015 GTI S 2008 BMW Z4 3.0si Coupe - because racecar
	Appreciate 0 Quote

06-30-2011, 09:28 AM	#4
Mr_PharmD Major 44 Rep 1,030 Posts Drives: 335i coupe Join Date: Mar 2011 Location: Fresno iTrader: (19)	i was told BBS +32 offsets would fit stoptech 6pt fronts and 4 pts rear so +35 shouldnt be an issue.
	Appreciate 0 Quote