19x9.5 front et 20 19x10.5 et 22 rear on e92 (335i)

Mafioso · 01-04-2013, 01:49 PM

Wondering if any one can help me out. Will 19x9.5 front et 20, 19x10.5 et 22 rear will work on a e92 non-m. I'm lowered on H&R sport. Thanks!!!

BoostedE90 · 01-04-2013, 02:12 PM

The pics are gone from the thread but he was running 19x10+22/19x10.5+16: http://www.e90post.com/forums/showthread.php?t=606915

And here's an earlier setup he was running: http://www.e90post.com/forums/showthread.php?t=358048

Going to need a good stretchy tire though.

Projekt_BooGie · 01-07-2013, 11:32 AM

your rim will poke 11mm in the front and 9mm in the rear...I say run 235/35 and 265/30 in the rear, nice roll, and you SHOULD be good. You could also add FK bumpstops if you are rubbing a little in the rear, or just add like .5 degree of camber in the rear.

project335i · 01-07-2013, 11:42 AM

This ^^^

It will fit fine dude

Mafioso · 01-07-2013, 01:53 PM

Quote:

Originally Posted by ACEE

your rim will poke 11mm in the front and 9mm in the rear...I say run 235/35 and 265/30 in the rear, nice roll, and you SHOULD be good. You could also add FK bumpstops if you are rubbing a little in the rear, or just add like .5 degree of camber in the rear.

Thanks guys for taking the time and helping me with this.

Projekt_BooGie · 01-07-2013, 05:52 PM

no prob

iDriveSlo · 03-25-2013, 10:55 PM

is it possible to run this set up with a proper tire in the back? I.E. 295/30/19 with fender rolling?

uniter · 04-10-2013, 07:50 PM

Quote:

Originally Posted by iDriveSlo

is it possible to run this set up with a proper tire in the back? I.E. 295/30/19 with fender rolling?

NO >:} 10.5 ET 40+

#Tee · 04-10-2013, 08:59 PM

Quote:

Originally Posted by iDriveSlo

is it possible to run this set up with a proper tire in the back? I.E. 295/30/19 with fender rolling?

sure you can, just raise the rear and leave about a 3 inch gap.

project335i · 04-10-2013, 09:34 PM

Quote:

Originally Posted by ~XxTeexX~

Quote:

Originally Posted by iDriveSlo

is it possible to run this set up with a proper tire in the back? I.E. 295/30/19 with fender rolling?

sure you can, just raise the rear and leave about a 3 inch gap.

I would do this it will look great. Make sure to raise the front as well to get the proper look

:

#Tee · 04-11-2013, 10:34 AM

Quote:

Originally Posted by project335i

I would do this it will look great. Make sure to raise the front as well to get the proper look

:

ahhah you feel me now dev? over and over it gets soo ridiculous. cant help it

uniter · 04-11-2013, 10:40 AM

I assume you guys have the geometry numbers kicking around, right? It would be chill to just have a spreadsheet to refer to X]

project335i · 04-11-2013, 03:51 PM

Quote:

Originally Posted by ~XxTeexX~

ahhah you feel me now dev? over and over it gets soo ridiculous. cant help it

Yeah yeah it just never ends around here. More fun joining lol

#Tee · 04-11-2013, 03:58 PM

Quote:

Originally Posted by uniter

I assume you guys have the geometry numbers kicking around, right? It would be chill to just have a spreadsheet to refer to X]

no its all in our heads, while everyone else searching the forum about tunes/fmic/meth/e85 with oil leaks/mil lights/ninja codes and rough idles the rest of us are into aesthetics. we actually throw on wider wheels while messing with spacers/tires/suspension to find what works and doesnt. theres more to cars than making them fast and recording a speed competition on the highway and posting them on youtube.

project335i · 04-11-2013, 04:07 PM

Quote:

Originally Posted by ~XxTeexX~

no its all in our heads, while everyone else searching the forum about tunes/fmic/meth/e85 with oil leaks/mil lights/ninja codes and rough idles the rest of us are into aesthetics. we actually throw on wider wheels while messing with spacers/tires/suspension to find what works and doesnt. theres more to cars than making them fast and recording a speed competition on the highway and posting them on youtube.

well said

Now where is my spread sheet with all my figures

uniter · 04-11-2013, 06:06 PM

Well shit I wasn't minimizing fitment cognoscenti... Just wondering about 'the process.' Hell if we didn't think it was important we wouldn't be asking, right?

amusez34 · 04-17-2013, 10:12 PM

Quote:

Originally Posted by ~XxTeexX~

no its all in our heads, while everyone else searching the forum about tunes/fmic/meth/e85 with oil leaks/mil lights/ninja codes and rough idles the rest of us are into aesthetics. we actually throw on wider wheels while messing with spacers/tires/suspension to find what works and doesnt. theres more to cars than making them fast and recording a speed competition on the highway and posting them on youtube.

TXTT · 05-09-2013, 05:55 AM

Quote:

Originally Posted by ~XxTeexX~

Quote:

Originally Posted by uniter

I assume you guys have the geometry numbers kicking around, right? It would be chill to just have a spreadsheet to refer to X]

no its all in our heads, while everyone else searching the forum about tunes/fmic/meth/e85 with oil leaks/mil lights/ninja codes and rough idles the rest of us are into aesthetics. we actually throw on wider wheels while messing with spacers/tires/suspension to find what works and doesnt. theres more to cars than making them fast and recording a speed competition on the highway and posting them on youtube.

then why does the rear wheel on your profile pic look so fugly with all that research? .

project335i · 05-09-2013, 11:28 AM

Quote:

Originally Posted by TXTT

Quote:

Originally Posted by ~XxTeexX~

Quote:

Originally Posted by uniter

I assume you guys have the geometry numbers kicking around, right? It would be chill to just have a spreadsheet to refer to X]

no its all in our heads, while everyone else searching the forum about tunes/fmic/meth/e85 with oil leaks/mil lights/ninja codes and rough idles the rest of us are into aesthetics. we actually throw on wider wheels while messing with spacers/tires/suspension to find what works and doesnt. theres more to cars than making them fast and recording a speed competition on the highway and posting them on youtube.

then why does the rear wheel on your profile pic look so fugly with all that research? .

Haha. Really. Please describe what you mean by fugly bud

01-04-2013, 01:49 PM	#1
Mafioso Lieutenant 35 Rep 445 Posts Drives: E92 ///M3 SSII Join Date: Nov 2011 Location: Gilbert AZ iTrader: (0)	19x9.5 front et 20 19x10.5 et 22 rear on e92 (335i) Wondering if any one can help me out. Will 19x9.5 front et 20, 19x10.5 et 22 rear will work on a e92 non-m. I'm lowered on H&R sport. Thanks!!! __________________
	Appreciate 0 Tweet Quote

01-04-2013, 02:12 PM	#2
BoostedE90 Lieutenant Colonel 55 Rep 1,690 Posts Drives: e90 335i 6MT Join Date: Nov 2007 Location: Tampa/Gainesville, FL iTrader: (5)	Yes! The pics are gone from the thread but he was running 19x10+22/19x10.5+16: http://www.e90post.com/forums/showthread.php?t=606915 And here's an earlier setup he was running: http://www.e90post.com/forums/showthread.php?t=358048 Going to need a good stretchy tire though.
	Appreciate 0 Quote

01-07-2013, 11:32 AM	#3
Projekt_BooGie Average Car Exceeding Expectations (ACEE) 358 Rep 4,806 Posts Drives: 2007 335i e92 Join Date: Nov 2010 Location: Home random floods and Cajun Navy iTrader: (9) Garage List 2007 e92 [7.00]	your rim will poke 11mm in the front and 9mm in the rear...I say run 235/35 and 265/30 in the rear, nice roll, and you SHOULD be good. You could also add FK bumpstops if you are rubbing a little in the rear, or just add like .5 degree of camber in the rear. __________________ too much to list...just know its wide and bagged Last edited by Projekt_BooGie; 01-07-2013 at 12:16 PM..
	Appreciate 0 Quote

01-07-2013, 11:42 AM	#4
project335i Banned 144 Rep 4,501 Posts Drives: Wide Load Join Date: Mar 2011 Location: SAUGA iTrader: (6)	This ^^^ It will fit fine dude
	Appreciate 0 Quote

01-07-2013, 05:52 PM	#6
Projekt_BooGie Average Car Exceeding Expectations (ACEE) 358 Rep 4,806 Posts Drives: 2007 335i e92 Join Date: Nov 2010 Location: Home random floods and Cajun Navy iTrader: (9) Garage List 2007 e92 [7.00]	no prob __________________ too much to list...just know its wide and bagged
	Appreciate 0 Quote

03-25-2013, 10:55 PM	#7
iDriveSlo Captain 39 Rep 689 Posts Drives: 335i Coupe M-Sport Lemans blue Join Date: Sep 2012 Location: United States iTrader: (1) Garage List 2009 335i M-Sport [0.00]	is it possible to run this set up with a proper tire in the back? I.E. 295/30/19 with fender rolling? __________________ 2009 E92 M-Sport 6AT PTF Pro Tune Vargas Stage 2
	Appreciate 0 Quote

04-11-2013, 10:40 AM	#12
uniter Black on Black on Black. 38 Rep 532 Posts Drives: 335i/6mt Sport,Nav,Prem. Join Date: Feb 2010 Location: New Hope, PA iTrader: (1)	I assume you guys have the geometry numbers kicking around, right? It would be chill to just have a spreadsheet to refer to X] __________________ LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV
	Appreciate 0 Quote

04-11-2013, 06:06 PM	#16
uniter Black on Black on Black. 38 Rep 532 Posts Drives: 335i/6mt Sport,Nav,Prem. Join Date: Feb 2010 Location: New Hope, PA iTrader: (1)	Well shit I wasn't minimizing fitment cognoscenti... Just wondering about 'the process.' Hell if we didn't think it was important we wouldn't be asking, right? __________________ LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV
	Appreciate 0 Quote