|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
LB 335i Build
|
|
08-29-2012, 10:06 PM | #1 |
Black on Black on Black.
38
Rep 532
Posts |
LB 335i Build
2009 e92 Lemans Blue 6spd with 40k.
Procede Rev3, ETS 7", Raceland DPs DCIs and a 4 link solid differential mount. Hardwired Laser Interceptor Dual Head 8.9 & Beltronics STI Driver. Needs rims and fat rubber still Only before pic for now (one from the dealer (:?)), car put down 260/275 on dynojet another 335i put down 275/285 on a different day on the same dyno. Baseline dyno : 260/275 2nd Dyno was done with Rev3, ETS, Raceland DPs and stock airbox on Stg 3 maps. AFRs were bad and the car was not running right at all. 343/371 *rd Dyno: 400/460 Spraying meth @ 18 PSI and 15 degrees of timing, my next bump up will have to be done while dyno-tuning.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV Last edited by uniter; 05-01-2014 at 12:08 PM.. Reason: Added new dynos |
03-18-2013, 11:33 PM | #3 |
Black on Black on Black.
38
Rep 532
Posts |
Been a while,
Car received a DEFIV Fabrication 335i Lock down kit to battle wheel-hop and miscellaneous general bullshit while hooning. A UUC EVO SSK 3 + DSSR was thrown on (UUC Did a horrible logistics job, get a vendor to price match them during a promotion and you'll actually get your parts.) Red poly trans mounts as well for good measure. Rogue Engineering Delrin Carrier Bushings (Ben @ Rogue is always a pleasure to deal with, had the Rogue SSK not been discontinued I would have definitely sourced one from them!) To take the daily abuse a ClutchMasters Dual Disk kit was fitted, street trim. Another little treat I had put in is a one-off complete pipe replacement for my stock intake, this is from the turbo inlets forward done by also by Defiv fabrication. All the work was done by Rick@Defiv, as always he was prompt with status updates, pictures via text, etc and his work was top-notch. Initial impressions: The UUC EVO SSK3 increases shift effort significantly over stock. This is a normal property of physics, less leverage = more effort. That being said the DSSR and SSK work together to provide excellent mechanical feedback and a short shift. I appreciate the peace of mind the combo provides. The Rogue Engineering Delrin carrier bushings further tighten things up. The ClutchMasters kit was a bit of a nightmare in sourcing and install: There were two problems during the install, the first was that I was shipped an 8 bolt flywheel whereas I have a 6 bolt crank, normally not an issue but ClutchMasters spent a month making a new flywheel (this flywheel had to be modified further to actually fit at my expense.) If you're thinking about getting a flywheel from any company be sure to first check your VIN against your dealership to figure out which type of flywheel you have. CM told me there were 4 variants. The second problem was that the clutch disks CM sent out were the wrong height, this didn't present an issue when first installed until the engine turned over, the throw-out-bearing sleeve seized with the friction disk and caused a bunch of damage. CM over-nighted the correct parts, however my parts and labor came out of pocket yet again. I'm at 500 miles on the clutch now and have had a chance to give it a good long beating and have some initial impressions.. The engagement point is much higher than stock, it also engages over a significantly reduced area of pedal movement and also much -harder-. This was a bit difficult to drive at first, but now I've got the hang of it and can drive it pretty well. There's quite a noise when trying to accelerate from <3k, I'm not sure if this is related to the red poly mounts on my trans or not.. If I get a chance to swap them I'll report back. Generally though when you're trying to drive in a spirited manner your car doesn't RPMs under 3k. Chatter is pronounced. I raised my idle points by 250RPM via INPA but be-advised that the ECU doesn't follow this to a T, idle points between the stock 650ish to 1,000 rpm did -not- eliminate chatter. The chatter is pronounced however I don't find that it is noticeable over the sound of my radio, nor is it overly loud from the exterior of the car. Power shifts are better now, with a great amount of bite in each gear at any RPM. My car is really appreciating the DEFIV kit with the additional spite and anger the clutchmasters kit doles out, the rear end is rock solid. I really can't complain. As for the final tidbit the intake piping is really awesome, Rick custom fabricated pipes for the front and rear turbos and located the filter in the front air dam behind the passenger side fog light where it gets the most cold air. All the piping was wrapped in gold heat reflective tape to keep the intake temps at their minimum. Sounds great and the car is more eager to build boost than ever. Once the weather improves I'll be working on making my tune more aggressive to accommodate the increased performance. I haven't gone to the dyno yet, but I'm excited to see what's happened with my numbers.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV Last edited by uniter; 03-18-2013 at 11:42 PM.. |
Appreciate
0
|
03-19-2013, 07:54 AM | #4 |
E92
17
Rep 130
Posts |
Nice. I have 2010 E92 LeMans M-sport, black trim, Cobb st1+, Quaife LSD, ETS 5" intercooler, quad LI 8.9 and STiR+ with displays hardwired into rear view mirror. I love LeMans. Are those 18" or 19" wheels you're running? I'm thinking about getting some forgestars or Enkei but I can't decide if I want to stay 19" or go 18" and save some weight.
|
Appreciate
0
|
03-19-2013, 09:51 AM | #5 |
Black on Black on Black.
38
Rep 532
Posts |
E92mech:
I'm working with the same damn debate What decides it for me is that the roads out here are absolute garbage, I'll bash the 19s to bit, 18s will have a fighting chance.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
03-19-2013, 09:56 AM | #6 |
E92
17
Rep 130
Posts |
Yup. I have the OEM type 225 19" wheels which look badass but weigh ~28lbs. I think if you get the right 18" it can look just as good, and I could potentially save 10lbs per wheel. That's huge, esp since I want to start doing some HPDE.
How does the DEFIV lockdown kit affect daily driving? |
Appreciate
0
|
03-19-2013, 10:22 AM | #7 | |
Black on Black on Black.
38
Rep 532
Posts |
Quote:
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
|
Appreciate
0
|
03-19-2013, 11:35 AM | #8 | |
3441
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
Quote:
6 bolt, traditionally, is for the 335is and 1m. However, there is a rare occurrence where some 335i get the 6 bolt. Spec also offers a steel flywheel to reduce chatter VS the aluminum flywheel options. Not to trying to sound like I'm pushing spec but it's good to know there are other options out there, especially for people reading. I would avoid any aftermarket single mass flyhweels if you can. They are not needed unless you are pushing over 500WHP. Stick with the OEM DMFW at any costs. |
|
Appreciate
0
|
03-19-2013, 12:59 PM | #9 |
Black on Black on Black.
38
Rep 532
Posts |
CM Has 6 bolt F/W's they just didn't have any in stock. For my purposes I'm eventually going single or twin + additional fueling so I need the extra holding power.
As for sticking with the OEM DMFW; I know first hand that these can fail with much less than 500HP. FBO without meth or eth I blew up my first DMFW, it shattered. My second one on teardown was on its way out, lots of play. These DMFWs can degrade over time and eventually nuke. Depends on the driver of course. They are definitely not made for over 350HP.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
03-19-2013, 01:07 PM | #10 |
EUROPROJEKTZ
187
Rep 7,958
Posts
Drives: backwards
Join Date: Dec 2008
Location: San Jose, CA (Bay Area)
|
Great write up! I can't wait to see how she does on the dyno!
__________________
LTMW|SPEEDELEMENT|EUROPROJEKTZ
#TeamStretchNPoke |
Appreciate
0
|
03-19-2013, 01:09 PM | #11 | |
3441
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
Quote:
Eitherway it sounds like you have your stuff in order. If anyone wants a single mass flywheel, atleast go with the steel option, it has a lot less chatter. |
|
Appreciate
0
|
03-19-2013, 01:13 PM | #12 |
Black on Black on Black.
38
Rep 532
Posts |
All day, every day.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
1
|
10-03-2013, 06:56 PM | #13 |
Black on Black on Black.
38
Rep 532
Posts |
Update; Car is in getting a methanol setup (finally). Wavetrac is almost completely nuked. Lots of noise / slop. Had to replace an axle.
Many miles on the clutch & running strong. Replaced wheels with r888s; these are super-grippy. Turbos blew out & were replaced with Vargas stg0 w/ upgraded wheels (my real turbo upgrade will be twin scroll single.) Pics/details around methanol setup to come.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
10-22-2013, 12:58 PM | #16 |
Black on Black on Black.
38
Rep 532
Posts |
That is all.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
10-22-2013, 02:22 PM | #17 |
Major General
456
Rep 6,478
Posts |
Custom port injected meth? Very cool idea but that must be a nightmare in terms of reliability. Nice that all of the cylinders will in theory receive an even spray though.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP
F30 N55 XDrive EBII |
Appreciate
0
|
10-22-2013, 02:24 PM | #18 |
Banned
41
Rep 1,257
Posts |
|
Appreciate
0
|
10-22-2013, 02:35 PM | #19 | |
Major General
456
Rep 6,478
Posts |
Quote:
But yea, IDK if spraying directly from the manifold allows for proper atomization.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP
F30 N55 XDrive EBII |
|
Appreciate
0
|
10-22-2013, 02:38 PM | #20 | |
Lieutenant Colonel
55
Rep 1,690
Posts |
Quote:
Also where does the car measure IAT's? |
|
Appreciate
0
|
10-22-2013, 03:24 PM | #21 |
Black on Black on Black.
38
Rep 532
Posts |
You guys are armchairing a low-resolution video Youtube will take noise and make big blocks out of it.
I assure you that it mists fine and that it works well with no hiccups. Doing its job just fine. Maintenance isn't really 'harder' with this than any other meth setup. IAT sensor is being sorted out, no worries there.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
05-01-2014, 12:10 PM | #22 |
Black on Black on Black.
38
Rep 532
Posts |
Works good enough for daily spray.
400/460, 18PSI @ 15.1 Degrees & 12.4 AFR Target. I need to dyno tune it to extract maximum smooth performance.
__________________
LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV |
Appreciate
0
|
Bookmarks |
|
|