BMW CODING success

Chewy734 · 07-31-2011, 03:18 PM

one more thing I forgot to ask... out of curiosity has anyone coded an E83 with the cable and software?

bumere90 · 07-31-2011, 04:16 PM

No diff, they're the same

fdriller9 · 07-31-2011, 10:16 PM

Quote:

Originally Posted by E92Ghost

I have downloaded the profile FSW PWS MAN from my car to enable digital speed. But when I look into the FSW_PWS.TRC file there is no line BC_DIGITAL_V.

Does this mean that this option is not available for my car or can I add this line by myself to enable it.

The DIY guide has an error in it. When all of the modules in your car are displayed (Read ECU button) you select KOMBI not, CAS.

Neutrino45 · 07-31-2011, 10:22 PM

Quote:

Originally Posted by E92Ghost

Thanks for the quick answer. I think I know now about how it works and will try it.

[one day later] And it works

But I want the front indicators dimmed as sidemarker lamps. I have changed on module FRM
SIDEMARKER_US from nicht_aktiv to aktiv. But nothing happens. What have I to change (more) to get this working?

I don't really understand your question.

I think SIDEMARKER_US should be nicht_aktiv because you don't want the side marker on. There are a few side marker values. Is this the only one you found in the FRM module?

E92Ghost · 08-01-2011, 04:17 AM

I like to enable the front indicators as dimmed as sidemarker lamps. I have attached an image maybe tells that more than words.

anerbe · 08-01-2011, 09:08 AM

Quote:

Originally Posted by E92Ghost

I like to enable the front indicators as dimmed as sidemarker lamps. I have attached an image maybe tells that more than words.

look up corner delete mod, and do the opposite of what everybody does in this forum to turn off the dimmed parking lights. this will need to be coded to your vehicle

i.e. I think it's something along the lines of ...SIDEMARKER_US... change this from nicht_activ to activ.

justa3series · 08-01-2011, 09:43 AM

Quote:

Originally Posted by jphughan

Correct, you take the initial TRC file that's generated when you click Back after loading the FSW PSW MAN profile (it should be about 220 KB), rename it to a MAN file, and click Process Car. Or you can just click Process Car with a blank MAN file and that will restore you to all factory defaults.

Use expertprofile and code module. Process car is not "proper" way to reset coding according to VO. If expertprofile setup correctly it will not use .MAN manipulation.

justa3series · 08-01-2011, 09:45 AM

Quote:

Originally Posted by Chewy734

What's the difference between these two cables?

http://cgi.ebay.com/ebaymotors/ws/eB...m=220808666042

http://cgi.ebay.com/ebaymotors/ws/eB...m=220818371566

And more importantly, which would should I get? Does it matter?

This seller is very repped, and also comes with adapter allowing working on all cars without soldering pins in cable.

http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350

E92Ghost · 08-01-2011, 10:56 AM

Quote:

Originally Posted by Neutrino45

Is this the only one you found in the FRM module?

I have the following two options:
SIDEMARKER_US -aktiv
PWM_SIDEMARKER_BLK_V - wert_01

In the backup (made before) of al modules I also have:
PWM_BLK_V_FKT_SIDEMARKER - wert_01
SIDEMARKER_US_NFRM - nicht_aktiv
PWM_FRA_V_FKT_SIDEMARKER - wert_01
SIDEMARKER_US_MIT_FRA_V - nicht_aktiv

I only don't know where I have to program these.

Quote:

Originally Posted by anerbe

i.e. I think it's something along the lines of ...SIDEMARKER_US... change this from nicht_activ to activ.

I have already changed SIDEMARKER_US to active. But this has no effect.

Neutrino45 · 08-01-2011, 11:02 AM

Quote:

Originally Posted by justa3series

This seller is very repped, and also comes with adapter allowing working on all cars without soldering pins in cable.

http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350

This is the best person to order your cable from!

Elliott@DetailAddict · 08-01-2011, 01:33 PM

Quote:

Originally Posted by Neutrino45

This is the best person to order your cable from!

+1

mrtanz · 08-01-2011, 07:33 PM

Anyone know if its possible to code window lift. I know we can code it to put up the window via keyfob or comfort assist (Holding it down) which i already have enabled however i am wanting the windows to go up when i press the lock button ONCE and not have to hold it down

naamanf · 08-01-2011, 09:33 PM

Quote:

Originally Posted by mrtanz

Anyone know if its possible to code window lift. I know we can code it to put up the window via keyfob or comfort assist (Holding it down) which i already have enabled however i am wanting the windows to go up when i press the lock button ONCE and not have to hold it down

I don't think there is, but it would be a nice feature to have.

Elliott@DetailAddict · 08-01-2011, 10:41 PM

No one touch capability unfortunately.

mrtanz · 08-01-2011, 11:12 PM

so only option is to get window lift kit installed?

kennethpetro · 08-02-2011, 01:21 AM

http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350

I have a 2011 328i coupe - Is this the only cable i'll need to begin coding my car?

Tbird1000 · 08-02-2011, 04:07 AM

Quote:

Originally Posted by kennethpetro

http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350

I have a 2011 328i coupe - Is this the only cable i'll need to begin coding my car?

Yepp, it's the only cable you'll need to be able to work with INPA and NCSExpert

JoseSportM · 08-02-2011, 04:57 AM

Hey guys

I need to know if i need to recode with ncsexpert after a BMW dealer update the software of the car? Or if my coding will stay there.

Regards
Jose

mrtanz · 08-02-2011, 05:48 AM

Question,
Each time you code a different code do you need to go through the steps of creating a new profile from expertmode and saving it as FSW PSW MAN or can i use my profile without models of BMW

As there are not many people who have the cable here in Sydney i am going to do it for the local guys but wanted to check first

justa3series · 08-02-2011, 07:51 AM

How many times have we posted the correct cable to get!!!

"Question,
Each time you code a different code do you need to go through the steps of creating a new profile from expertmode and saving it as FSW PSW MAN or can i use my profile without models of BMW"

I am not sure what you mean "without models of BMW" but you use one profile. Read DIY to create FSWPSWMAN profile. Expertprofile is default. When you read module it overwrites file that you use for writing back to car.

It's simple

Load profile
Select module
Read module
Makes changes
Write changes

mrtanz · 08-02-2011, 08:35 AM

Also not sure if you are directing the cable point to me but i already have the cable

sorry it was a mistake in my word
meant "or can i use my profile with any model"

I have already created FSWPSWMAN profile from my car and successfully coded; my question is if i plug in into another car do i use the profile from my car or do i need to create a new profile for that specific car?

Elliott@DetailAddict · 08-02-2011, 12:44 PM

Quote:

Originally Posted by jose260gti

Hey guys

I need to know if i need to recode with ncsexpert after a BMW dealer update the software of the car? Or if my coding will stay there.

Regards
Jose

Yes, more than likely they recode everything and you usually will need to redo everything.

Quote:

Originally Posted by mrtanz

Question,
Each time you code a different code do you need to go through the steps of creating a new profile from expertmode and saving it as FSW PSW MAN or can i use my profile without models of BMW

As there are not many people who have the cable here in Sydney i am going to do it for the local guys but wanted to check first

No. Just use the profile you already made in the DIY

Quote:

Originally Posted by mrtanz

Also not sure if you are directing the cable point to me but i already have the cable

sorry it was a mistake in my word
meant "or can i use my profile with any model"

I have already created FSWPSWMAN profile from my car and successfully coded; my question is if i plug in into another car do i use the profile from my car or do i need to create a new profile for that specific car?

No

07-31-2011, 03:18 PM	#3059
Chewy734 Major General 484 Rep 6,798 Posts Drives: 2006 BMW 330i ZPP, ZSP Join Date: Dec 2008 Location: LA, CA iTrader: (15)	one more thing I forgot to ask... out of curiosity has anyone coded an E83 with the cable and software? __________________ Currently for sale: [19" Linea Corse LC818 wheel], [19" Fallen FK452 tire]
	Appreciate 0 Quote

07-31-2011, 04:16 PM	#3060
bumere90 Grozniy 184 Rep 2,602 Posts Drives: Carless Join Date: Jan 2009 Location: FL iTrader: (12)	No diff, they're the same __________________ -fatman
	Appreciate 0 Quote

08-01-2011, 04:17 AM	#3063
E92Ghost New Member 1 Rep 29 Posts Drives: E92 335i Join Date: Jul 2011 Location: Netherlands iTrader: (0)	I like to enable the front indicators as dimmed as sidemarker lamps. I have attached an image maybe tells that more than words. Attached Images
	Appreciate 0 Quote

08-01-2011, 07:33 PM	#3070
mrtanz Lieutenant 26 Rep 457 Posts Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia iTrader: (0)	Anyone know if its possible to code window lift. I know we can code it to put up the window via keyfob or comfort assist (Holding it down) which i already have enabled however i am wanting the windows to go up when i press the lock button ONCE and not have to hold it down
	Appreciate 0 Quote

08-01-2011, 10:41 PM	#3072
Elliott@DetailAddict Brigadier General 302 Rep 4,443 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	No one touch capability unfortunately.
	Appreciate 0 Quote

08-01-2011, 11:12 PM	#3073
mrtanz Lieutenant 26 Rep 457 Posts Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia iTrader: (0)	so only option is to get window lift kit installed?
	Appreciate 0 Quote

08-02-2011, 01:21 AM	#3074
kennethpetro Lieutenant 8 Rep 421 Posts Drives: 2011 328i JB/Black Dakota Join Date: Apr 2008 Location: North Jersey iTrader: (2)	http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350 I have a 2011 328i coupe - Is this the only cable i'll need to begin coding my car? __________________ 2011 Jet Black 328i, 6-Speed Manual, Black Dakota Leather, Brushed Aluminum, Harmon Kardon w/ Surround Sound, Navi, BMW Apps, iPod & USB Adapter, BMW Assist w/ Bluetooth, Full LED Interior, 6000k HID Fogs, Matte Black Kidney Grills, M3 Lip Spoiler, ACS Roof Spoiler, 19" Beyern Black Mesh 19x8.5 front(ET40) 19x9.5 rear(ET30)
	Appreciate 0 Quote

08-02-2011, 04:57 AM	#3076
JoseSportM JoseSportM 417 Rep 371 Posts Drives: BMW G42 Join Date: May 2008 Location: Zurich iTrader: (1)	Hey guys I need to know if i need to recode with ncsexpert after a BMW dealer update the software of the car? Or if my coding will stay there. Regards Jose
	Appreciate 0 Quote

08-02-2011, 05:48 AM	#3077
mrtanz Lieutenant 26 Rep 457 Posts Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia iTrader: (0)	Question, Each time you code a different code do you need to go through the steps of creating a new profile from expertmode and saving it as FSW PSW MAN or can i use my profile without models of BMW As there are not many people who have the cable here in Sydney i am going to do it for the local guys but wanted to check first
	Appreciate 0 Quote

08-02-2011, 07:51 AM	#3078
justa3series Banned 9 Rep 160 Posts Drives: 2010 328xi Join Date: Jun 2011 Location: NY iTrader: (1)	How many times have we posted the correct cable to get!!! "Question, Each time you code a different code do you need to go through the steps of creating a new profile from expertmode and saving it as FSW PSW MAN or can i use my profile without models of BMW" I am not sure what you mean "without models of BMW" but you use one profile. Read DIY to create FSWPSWMAN profile. Expertprofile is default. When you read module it overwrites file that you use for writing back to car. It's simple Load profile Select module Read module Makes changes Write changes
	Appreciate 0 Quote

08-02-2011, 08:35 AM	#3079
mrtanz Lieutenant 26 Rep 457 Posts Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia iTrader: (0)	Also not sure if you are directing the cable point to me but i already have the cable sorry it was a mistake in my word meant "or can i use my profile with any model" I have already created FSWPSWMAN profile from my car and successfully coded; my question is if i plug in into another car do i use the profile from my car or do i need to create a new profile for that specific car?
	Appreciate 0 Quote