[e.n335]

Hi Shiv,

Beside the 14-15psi maps for steptronic and manual, please release 12-13psi map variations as well. This would help to sort out issues very quickly and allow V2 customers to run on lower fuel and boost when they prefer to do so.

My 2 cents ( and my wish as well )

Thanks,
Eugen

Originally Posted by shiv@vishnu

Yep. If you are running free flow intake, exhaust, catless dp, etc,, the baseline map (with default torque settings) will result in momentary boost spikes of 20+ psi. So you will have to adjust the torque settings downwards to keep boost to stable max of 14-15psi.

For most pump gas applications, I recommend running 12-13psi in the low end and 14-15psi above 5500rpm. This way you limit torque output while still making good top end power.

However, if you are running all those free flow mods, you have to be careful not to make more power than your fuel system can support. In your case, I'd drop top end boost (above 5500rpm) to 12-13psi. This will keep you from running uncomfortably lean. At least until you get it on the dyno and check your AFR.

We should have your exact same set-up on our car sometime next week and will have more info for you. But for now, just play it safe. I'm sure the car is blazingly fast but you wanna be careful. I did talk to Dan @ Harmon last night about your car but it was late (during dinner) and didn't tell him to reduce your boost at high rpm. So it's my fault, not his. He did say the car is ridiculously fast though. Don't be surprised if it makes 400whp on your race gas mixture

We are going to release v2.0.2 shortly with a bunch of guidelines (and recommended User torque settings) that people can follow depending on their particular car set-up and octane.

Shiv

[scalbert]

I would also like to add that it is perfectly fine to go ahead and release this new map.

[pikkashoe]

I second scalbert! Today would be ideal, so I can use my car for the weekend to its full potential.

[Noize]

Nary a hiccup here, either.

[Kbueno]

I thought he was wrapping things up on 11-12? Release the map now and put in the text/recs later.

[pikkashoe]

Damm no map today. Oh well.

[NPDAN]

the day is not over.... maybe, just maybe they'll release the new map tonight... <<<< this means wishful thinking in this case.

[Driver72]

yes, release v2.0.2 this week, and then send out the next batch of 50 next week with the v2.0.2 preloaded.

[scalbert]

Originally Posted by Driver72

and then send out the next batch of 50 next week with the v2.0.2 preloaded.

That would be a bit more difficult since the map is loaded onto the PROcede and not the harness.

[scalbert]

BTW, I officially grant Vishnu the right to release the map.

[Driver72]

Originally Posted by scalbert

That would be a bit more difficult since the map is loaded onto the PROcede and not the harness.

Oh yeah, sh1t, I don't know what I was thinking.

[NPDAN]

Originally Posted by Driver72

Oh yeah, sh1t, I don't know what I was thinking.

I was with you driver72... ha ha ha

[doba_s]

give them some time ...

[zenmaster]

Originally Posted by scalbert

That would be a bit more difficult since the map is loaded onto the PROcede and not the harness.

lol

[BoLaS]

for new map using jet propulsion technology!!!!!! lol

[mayno]

hey Shiv, please release the v.2.0.2 map on my b-day, Dec. 22. you can then release it to the broader group 2 days later. thanks.

[e.n335]

Originally Posted by mayno

hey Shiv, please release the v.2.0.2 map on my b-day, Dec. 22. you can then release it to the broader group 2 days later. thanks.

Would be a little bit late, IMO .

- Eugen

[zenmaster]

I got v2 a few weeks ago but am using bypass plugs until v2.0.2.

[munters]

At the moment I'm always driving in Valet mode till the engine is warmed up.

Could it not be an idea to change the map automatically to the High performance map when the oil is warmed up? (I don't think anyone want to WOT with cold Oil) or a method while driving. Its not to comfortable to stop and restart the engine.
I know I could also control my foot but that's hard sometimes

[normtrum]

Originally Posted by munters

At the moment I'm always driving in Valet mode till the engine is warmed up.

Could it not be an idea to change the map automatically to the High performance map when the oil is warmed up? (I don't think anyone want to WOT with cold Oil) or a method while driving. Its not to comfortable to stop and restart the engine.
I know I could also control my foot but that's hard sometimes

Or you could just drop the valet mode, and keep the rpm's low until your temp gets up to at least 200. I mean, that's what I do now with 1.45, and what I'm planning to do with V2 (eventually...still waiting).

Believe me I totally understand not being able to "control your foot".....It seems like I look at my temp gauge more then I look at the road when I first get going.

[OpenFlash]

Originally Posted by zenmaster

I got v2 a few weeks ago but am using bypass plugs until v2.0.2.

Why? There's nothing wrong with v2.0.1. Just a little overly conservative. Still considerably stronger than v1.

[satinghostrider]

Originally Posted by shiv@vishnu

Why? There's nothing wrong with v2.0.1. Just a little overly conservative. Still considerably stronger than v1.

Amen to that!