[Pseudo Nim]

This shift indicator works only in 2009+, right?

[el-drifot]

Efficient Dynamic is stock on bmw build since 2008, here in Europe.
Greetz
El-Drifto

[Pseudo Nim]

Originally Posted by el-drifot

Efficient Dynamic is stock on bmw build since 2008, here in Europe.
Greetz
El-Drifto

Any way to cheek if my North American 2008 has it?

[jphughan]

Originally Posted by Pseudo Nim

Any way to cheek if my North American 2008 has it?

It won't have it enabled by default or as a selectable option. If you're asking whether it can be made available via coding, try dumping your car's config and see whether it's there in the options. If you don't find it, this thread suggests that adding options that don't already exist in the module is a pretty bad idea.

[Wissam]

I tried the "SCHALT PKT DAUERHAFT" set to "aktiv", still doesn't work...the ability to toggle ON/OFF is now gone, as expected...so seems like it's year dependent...

[Kalud]

Originally Posted by jphughan

I'd be very interested in additional information about this. I'll be picking up my 2011.75 M3 soon (2011.75 = Option 6NR) and I'd love to code it so Auto Start/Stop comes up in its last state rather than defaulting to OFF. Someone got this behavior coded by a dealer in Australia so it must be possible.

I'd also like to code M3s starting in Servotronic Sport mode so I don't have to push the M button to get it -- can't understand why BMW doesn't allow this!! Ideally I'd like to preserve a way to access Normal mode (maybe it can start up in Sport but if you go into M Drive and back out, it's Normal?)

I guess it would be possible, once you get the car, send the FSW_PSW.TRC of the whole car and we should be able to figure it out.

Originally Posted by jphughan

In other news, do the Daten files from ISTA 39 work on 2011.5 or 2011.75 M3s? Do I need 40? Something even newer?

Most modules will probably work and you will probably need an updated for the latest combox (not yet released / leaked) version 41 or something I guess.

[Kalud]

Originally Posted by Toad335

Any luck with this? Any noticable difference in the timing of your lowbeams kicking on when set to the different values?

I haven't been able to test fully, yesterday when I took the car it was rainy and I think my xenon would have been selected but I was still on angel eyes (less sensitivity setting). But its not enough tests yet to confirm. I will report back once I am more confident on the results

[tldoxmf87]

Anyone know how to enable the foglights only with the angel eyes??

[AW128i]

Originally Posted by Toad335

Any luck with this? Any noticable difference in the timing of your lowbeams kicking on when set to the different values?

I activated this on my car and I say yes, there is a noticeable difference. Prior to enabling this, during my drive to work, my lights would go on and off a couple times as my direction of travel and ambient light conditions changed due to overhanging trees, etc. This morning, I noted that my lights went off at one point and remained off for the rest of my drive until I entered the parking garage at work. I have mine set on the lowest sensitivity.

[matrix76]

Originally Posted by AW128i

I activated this on my car and I say yes, there is a noticeable difference. Prior to enabling this, during my drive to work, my lights would go on and off a couple times as my direction of travel and ambient light conditions changed due to overhanging trees, etc. This morning, I noted that my lights went off at one point and remained off for the rest of my drive until I entered the parking garage at work. I have mine set on the lowest sensitivity.

I changed mine as well and found the same results, this is a good feature if you set your AE's as DRL with corner deletes.

[Kalud]

Originally Posted by tldoxmf87

Anyone know how to enable the foglights only with the angel eyes??

Front fog lights are "NSW".

I would start to play with those:

DRL_TFL_MIT_NSW
	nicht_aktiv
NSW_DEF_CC_MELD_TFL
	nicht_aktiv
NSW_FKT_PARKL
	nicht_aktiv
NSW_FKT_SL
	nicht_aktiv
PARKL_FKT_MIT_NSW
	nicht_aktiv
SL_FKT_MIT_NSW
	nicht_aktiv

By activating one at a time, I am pretty sure it can be done. I might try myself later this week if you cannot make it work before.

Interesting find:

Cornering fog light :

ABBIEGELICHT_MIT_NSW
nicht_aktiv

[onebadmofo]

Originally Posted by tldoxmf87

Anyone know how to enable the foglights only with the angel eyes??

Switch headlights to parking (1 o'clock) and turn on fog lights? You need amber corners disabled though.

[AW128i]

Originally Posted by matrix76

I changed mine as well and found the same results, this is a good feature if you set your AE's as DRL with corner deletes.

Did your car, like mine, reset things like the date and time, and the service info? My next service is showing as 5/2015! My oil, brakes, and inspection info are still the same, however.

[AW128i]

Originally Posted by Kalud

Interesting find:

Cornering fog light :

Have you tried this? Could prove interesting! I believe the current X5 uses the fog lights as cornering lights.

[matrix76]

Originally Posted by AW128i

Did your car, like mine, reset things like the date and time, and the service info? My next service is showing as 5/2015! My oil, brakes, and inspection info are still the same, however.

I know it changed the Date/Time but I didn't look at the service date, if yours changed then I can only bet that mind did as well. I'll check after work.

[DESI4life10]

Originally Posted by matrix76

I know it changed the Date/Time but I didn't look at the service date, if yours changed then I can only bet that mind did as well. I'll check after work.

I coded this and nothing changed other than the Time being reset.

[carlosalbertogui]

hi

iam in a nightmare

i went to bmw and they put frm3 on my car
reprograme the ligts xenon and rear lights LCI.....

by the way i notice that brake lights where always on even if i dont press the brake pedal .

in my home i try changing the wires to see if it goes off and nothing

in next day i went out when i was driving and dsc dbc rfm errors on screnn fuel pump fault etc car shut down.

trailer to bmw

is now on bmw and they dont know what the car haves
car dont even start just makes the noise and nothing errors dsc dbc etc

hey do a brake fuid change also it was time to do it

can you help me

[Kalud]

Originally Posted by carlosalbertogui

hi

iam in a nightmare

i went to bmw and they put frm3 on my car
reprograme the ligts xenon and rear lights LCI.....

Maybe I don't understand exactly what you mean, but BMW installed a FRM3 and they have done the programming also ? You haven't tried to code anything yourself right? If so, I don't think you are posting in the appropriate thread...

Originally Posted by carlosalbertogui

by the way i notice that brake lights where always on even if i dont press the brake pedal .

in my home i try changing the wires to see if it goes off and nothing

This might only be DRL on the breake light. Canadian cars like mine has front (angel eyes) and rear (break light) on all the time. And it is possible to code them to not have break light as DRL. (RL_BL_2_MIT_TFL in FRM). Maybe the module they installed had this activated by default.

Originally Posted by carlosalbertogui

in next day i went out when i was driving and dsc dbc rfm errors on screnn fuel pump fault etc car shut down.

trailer to bmw

is now on bmw and they dont know what the car haves
car dont even start just makes the noise and nothing errors dsc dbc etc

hey do a brake fuid change also it was time to do it

can you help me

I would wait for those, BMW has the car right now? So they should be able to find out...

[Wissam]

I've recently noticed a little problem...when I set the headlight switch to Auto, the low beam headlights will always come on no matter how bright it is outside...this seems to have happened after coding the high beam DRL disable by changing DRL_V_GEDIMMT to nicht_aktiv in the FRM sub-module (my car does not an NFRM sub-module)...prior to coding, I had installed the Daeos DRL Harness but I'm pretty sure the headlight switch was still working normally in Auto after harness installation...I tried coding the Auto headlight sensor sensitivity but even at the lowest sensitivity setting, the headlights still come on in bright sunlight...any advice? I'm especially curious if others who disabled the DRL through the FRM sub-module per above have the same issue...

[Pseudo Nim]

Are you sure you didn't code some OTHER format of lights, one from a country that requires low beams on all the time? I have seen that once, it was because the headlights were coded to some weird state. Maybe re-do it to USA or Canadian spec?

[DESI4life10]

DRL_V_GEDIMMT does not have to be de-activated in order to remove your drl lights.

I have my drl disabled but that line is set to active (default).

[Wissam]

Originally Posted by Pseudo Nim

Are you sure you didn't code some OTHER format of lights, one from a country that requires low beams on all the time? I have seen that once, it was because the headlights were coded to some weird state. Maybe re-do it to USA or Canadian spec?

I'm pretty sure...I even tried on another car (2006 330) that has never been coded before and it now has the same issue...anyways, how do I re-do it to a USA or Canadian spec?

Originally Posted by DESI4life10

DRL_V_GEDIMMT does not have to be de-activated in order to remove your drl lights.

I have my drl disabled but that line is set to active (default).

Can you share how you did it? BTW, my car doesn't have the NFRM sub-module and the "TAGFAHRLICHT_ECE_1" doesn't exist in my FRM sub-module or any other sub-module...