[pepsih]

hey guys i will do my first retrofit.
front and rear PDC
i have to add $508 to VO
but in which modules?
CAS? FRM? CAPPL?
thanks

i know i also have to change PDC_type set to rear in CGATE and CHOST module and change this to full

[Najt]

FA codes are coded into CAS and NFRM in e9x

[808AWD325xi]

Originally Posted by akotten

Decided to move it all to one post. Enjoy!

Windows 7 64-bit NCS Expert
NCS Expert Files (Folder Link)
https://mega.co.nz/#F!OI4S2JzJ!SJLfZWUwMYJSMU38Nzw67A


The patched expert profiles required for BMW Standard Tools 2.12 are attached.
Profiles go here: C:\NCSEXPER\PFL
(credit goes to ******84)


I've also attached the necessary txt file to convert the NCS Expert menus to English. I've only tested this on NCS Expert V4.0.1
Place the file here: C:\NCSEXPER\CFGDAT


Individual install file here:
Standard_Tools_Setup_2.12.exe (32.1 MB)
https://mega.co.nz/#!HBxi3CTa!AyhnTQ...RVQ2wYF5H8J4ek

I only use the 2.12 install for NCS Expert. I use a different patched verison of INPA.

I installed Standard Tools 2.12 and ******84's profiles w/SP-Daten 50.2 on a fresh install of Windows 7 x86 (32-bit.) I'm getting stuck at step 24 of Junior's NCS DIY guide. The password repxet doesn't work. What is the password for these v3 profiles?

Which profile should I select?

Thanks in advance!

[akotten]

Originally Posted by 808AWD325xi

I installed Standard Tools 2.12 and ******84's profiles w/SP-Daten 50.2 on a fresh install of Windows 7 x86 (32-bit.) I'm getting stuck at step 24 of Junior's NCS DIY guide. The password repxet doesn't work. What is the password for these v3 profiles?

Which profile should I select?

Thanks in advance!

I haven't used the software in a while, but I believe the profiles in the link, provided by ******, do not require the password.

I believe the last one on your list works fine for what we are doing.

[Ants]

Tried to search this thread but its a beast. Can I use this K+DCAN cable to register a new car battery?

[WhiteFury]

How do I use standard tools to scan obd codes? I have coded many things with NCS expert and winkfp. I know this probably sounds dumb lol

[cewo38]

heyy

can someone explain me how i can activate us lights with ncs expert
on my e90 pre-lci

thank you

[wilkr1]

Will the coding setup work on a windows vista machine?
I have been getting the error....please see attachment

Any help would be appreciated

[xxxjecxxx]

Originally Posted by 808AWD325xi

I installed Standard Tools 2.12 and ******84's profiles w/SP-Daten 50.2 on a fresh install of Windows 7 x86 (32-bit.) I'm getting stuck at step 24 of Junior's NCS DIY guide. The password repxet doesn't work. What is the password for these v3 profiles?

Which profile should I select?

Thanks in advance!

Try using the "Expert MAN" profile that is already there.

[xxxjecxxx]

Originally Posted by WhiteFury

How do I use standard tools to scan obd codes? I have coded many things with NCS expert and winkfp. I know this probably sounds dumb lol

INPA easiest way.

[808AWD325xi]

Originally Posted by akotten

Decided to move it all to one post. Enjoy!

Windows 7 64-bit NCS Expert
NCS Expert Files (Folder Link)
https://mega.co.nz/#F!OI4S2JzJ!SJLfZWUwMYJSMU38Nzw67A


The patched expert profiles required for BMW Standard Tools 2.12 are attached.
Profiles go here: C:\NCSEXPER\PFL
(credit goes to ******84)


I've also attached the necessary txt file to convert the NCS Expert menus to English. I've only tested this on NCS Expert V4.0.1
Place the file here: C:\NCSEXPER\CFGDAT


Individual install file here:
Standard_Tools_Setup_2.12.exe (32.1 MB)
https://mega.co.nz/#!HBxi3CTa!AyhnTQ...RVQ2wYF5H8J4ek

I only use the 2.12 install for NCS Expert. I use a different patched verison of INPA.

Originally Posted by 808AWD325xi

I installed Standard Tools 2.12 and ******84's profiles w/SP-Daten 50.2 on a fresh install of Windows 7 x86 (32-bit.) I'm getting stuck at step 24 of Junior's NCS DIY guide. The password repxet doesn't work. What is the password for these v3 profiles?

Which profile should I select?

Thanks in advance!

Originally Posted by akotten

I haven't used the software in a while, but I believe the profiles in the link, provided by ******, do not require the password.

I believe the last one on your list works fine for what we are doing.

Originally Posted by xxxjecxxx

Try using the "Expert MAN" profile that is already there.

Thanks guys. Turned out that I needed a patched 32-bit version of NCS Expert 4.0.1 in order to be able to edit the profile without having to enter a password.

I found the patched version in this thread:
32bit English NCSEXPER.exe

[akotten]

Originally Posted by 808AWD325xi

Thanks guys. Turned out that I needed a patched 32-bit version of NCS Expert 4.0.1 in order to be able to edit the profile without having to enter a password.

I found the patched version in this thread:
32bit English NCSEXPER.exe

Or...you could just use the patched profiles and skip that step.

[Fuji]

Anyone followed xxxjecxxx's guide and ended up with two profiles called "FSW PSW MAN"? I don't know how I managed it... Also I don't know whether to delete one or leave them both. Clues anyone? Thanks!

[mstgeer]

Originally Posted by ryuunfujihara

Anyone followed xxxjecxxx's guide and ended up with two profiles called "FSW PSW MAN"? I don't know how I managed it... Also I don't know whether to delete one or leave them both. Clues anyone? Thanks!

I also have this issue, it appears both profiles are exactly the same on my computer and both seem to code fine.

The expert mode is now missing from my profile list.

Anyone else have any input?

[pepsih]

HI, just want to make sur before i do something lol
ipod retrofit coding i have to add fa "+ipod"
???
because in the list it's "SRPDA IPOD INTEGRATION"

thanks

[alexfrs]

Ive just been told by my local "specialist" that e92 lci 2011 can't be coded, is this right?

[shawnsheridan]

Originally Posted by alexfrs

Ive just been told by my local "specialist" that e92 lci 2011 can't be coded, is this right?

Bullshit!

[alexfrs]

lol, straight to the point

[cranelec]

Well, I have just finished reading page 68
I decided to skip to the end just to see the future! The good news...I actually bought my wife a 2007 328xi. I managed to kill/combine her 2013 Anniversary, Birthday, and Xmas gifts into one neat package. In return, I have found a new hobby thanks to this forum!@
Anyway, my cable should arrive in the next 3 weeks and I have a lot more to read.
Thanks to all the members of this forum.

mike

[Tolpap]

Originally Posted by matrix76

Well almost done. I have the CAS & KOMBI working fine after the update but the NFRM is erroring out. The update took, went from 280mg's to 411mg's but getting this error? I can access the other modules NP.

Please send me the details as well. Will be much appreciated. I have my idrive controller changed and i get this message. I dont know what needs to be done. I am not an expert just started on the coding etc.
Thanks in advance! Email tolisagro@gmail.com

[Fuji]

Originally Posted by mstgeer

I also have this issue, it appears both profiles are exactly the same on my computer and both seem to code fine.

The expert mode is now missing from my profile list.

Anyone else have any input?

Thanks for the reply, I'm sure they both work. Maybe it's because the profile was already made and then we made another one?

[E36graduate]

I give up....after starting at the beginning post, I still can't figure out what and where to download the software? The rapidshare sight is long gone and searching is getting confusing. Any direction would be helpful on what software/verison would work on a E90 335xi and where to buy the software?